Archives: Products
Showing 14145–14160 of 23773 results
-
75mm SOCKET 1″ SQ DRRead moreKennedy Bi-Hexagon Standard Sockets, 1″
Bi-hexagon. (12 point). This range of 1â (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design gives a higher torque than normal sockets. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
75mm SPARK RESISTANT O/END SLOGGING WRENCH Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Open End Slogging Wrench
Open End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
-
75mm SPARK RESISTANT R/END SLOGGING WRENCH Al-BrRead moreAluminium-Bronze Spark-Resistant Safety Tools: Ring End Slogging Wrench
Ring End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
75mm SPARK RESISTANT SCRAPER Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Scraper
Scraper
Blade length: 95mm (33/4â). Blade width: 75mm (3â).
Overall length: 200mm (8â).Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
-
75mm SURFACE PREP. DISC-GREY (ULTRA FINE)Read moreSurface Preparation & Finishing Discs
A complete range of flexible surface preparation discs from coarse grit through to a fine polishing disc allows you to rapidly and consistently achieve the finish you require. Ideal for rust removal, preparing and cleaning welds. The threaded mounting allows rapid disc change when required.
-
75mm SURFACE PREPARATIONDISCS COARSERead moreYork Surface Preparation Discs
Designed for cleaning and finishing on all metals. Leaves a burr-free surface ready for painting or coating. Can also be used for the removal of light rust, oxides and coatings.
-
75mm SURFACE PREPARATIONDISCS MEDIUMRead moreYork Surface Preparation Discs
Designed for cleaning and finishing on all metals. Leaves a burr-free surface ready for painting or coating. Can also be used for the removal of light rust, oxides and coatings.
-
75mm SURFACE PREPARATIONDISCS V-FINERead moreYork Surface Preparation Discs
Designed for cleaning and finishing on all metals. Leaves a burr-free surface ready for painting or coating. Can also be used for the removal of light rust, oxides and coatings.
-
75mm TEE PLATE BZP – E/GALV (PK-10)Read moreSteel Flat Tee Plate
Provide essential rigidity to assemblies and reinforce joints. Bright zinc plated steel. Five screw holes. Size: 75mm.
-
75mm WORKSHOP DRILL PRESS VICERead moreSenator Drill Press Vice
Suitable for use on pillar/bench drills to steady the workpiece in all light duty drilling applications for the garage or small workshop. Cast construction with machined slots which are spaced to fit all popular drill stand bases. Cross drilled handle with sliding
T-bar for extra leverage. -
75mm WORKSHOP OPEN END SPANNERRead moreKennedy Open Jaw Spanners – Single-Ended
Single-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 894. -
75mm(3″) FLEXIBLE BACKINGPAD FOR HOOK-N-LOOP M6x1Read moreFlexible Backing Pads for hook-n-loop Sanding Discs
For use with Kobe Hook-n-Loop backed sanding discs, for rapid abrasive disc changing.
M6 Male Threaded – ‘No Hole’ -
75mm/3″ DIA HOOK-N-LOOP BACKED DISCS P320 (PK-25)Add to cartHook-n-Loop Backed Sanding Discs
No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.
-
75mm/3″ DIA HOOK-N-LOOP BACKED DISCS P400 (PK-25)Add to cartHook-n-Loop Backed Sanding Discs
No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.
-
75mm/3″ DIA HOOK-N-LOOP BACKED DISCS P600 (PK-25)Add to cartHook-n-Loop Backed Sanding Discs
No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.
