Archives: Products
Showing 13825–13840 of 23773 results
-
7/16″ BSF x 3FT MILD STEEL STUDDINGRead moreHigh Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: BSF
Mild Steel – Grade 4.6 Self-Colour: BSF
Colour-coded at each end of length for easy identification as shown. -
7/16″ BSW x 3FT MILD STEEL STUDDINGRead more
High Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: BSW
Mild Steel – Grade 4.6 Self-Colour: BSW
Colour-coded at each end of length for easy identification as shown. -
7/16″ BSW x 3FT MILD STEEL STUDDING ZINC PLATEDRead more
High Quality Screwed Studding – Mild Steel, Grade 4.6 Zinc-Plated: BSW
Mild Steel, Grade 4.6 Zinc-Plated: BSW
Colour-coded at each end of length for easy identification as shown. -
7/16″ CHUNKY S/E SWINGOVER SPANNERRead moreScaffolding Tools: Single Ended Swing Over Spanners
Manufactured to surpass the performance test BS2558: 1954. The sockets locate directly onto the handle relieving stress on the rivet. All sockets are plated, hardened and stress relieved to ensure they retain their shape.
Single Ended Swing Over Spanners
Single ended swingover handle spanners. Available in 7/16″ or 1/2″ Whitworth socket end size for use on fixings. -
7/16″ DEEP SOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – AF
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
7/16″ HEAVY DUTY S/E SWINGOVER SPANNERRead moreScaffolding Tools: Single Ended Swing Over Spanners
Manufactured to surpass the performance test BS2558: 1954. The sockets locate directly onto the handle relieving stress on the rivet. All sockets are plated, hardened and stress relieved to ensure they retain their shape.
Single Ended Swing Over Spanners
Single ended swingover handle spanners. Available in 7/16″ or 1/2″ Whitworth socket end size for use on fixings. -
7/16″ HSS S/S BRIGHT JOBBER DRILLRead moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
7/16″ HSS S/S JOBBER DRILLRp997.000Read moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
7/16″ HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills
General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
The drill has the same diameter on both the fluted section and the shank.
Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. -
7/16″ HSS S/S STUB DRILLRead moreHSS General Purpose Stub Drills – Imperial Sizes
Series S100 – Inch
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
7/16″ HSS T/S DRILLRp221.000Read moreGeneral Purpose HSS Taper Shank Drills, 1 Morse Taper – Inch Sizes
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN.
-
7/16″ HSS-COBALT SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Inch
Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Inch Tolerances
Diameter: up to 1 1/2â. Tolerance: +0.0025, -0.0005.
Diameter: Over 1 1/2â. Tolerance: +0.0050, -0.0000. -
7/16″ PODGER SWINGOVER SPANNERRead moreKennedy Scaffolding Tools: Combination Podger Spanner
Manufactured to surpass the performance test BS2558: 1954. The sockets locate directly onto the handle relieving stress on the rivet. All sockets are plated, hardened and stress relieved to ensure they retain their shape.
Combination Podger Spanner
Swingover handle spanner with a 7/16â Whitworth socket end for use on fixings. Features a cranked taper square podger end for use on eyebolt and jacking collars.
Overall length: 295mm.
Bar diameter: 15mm. -
7/16″ SQ x 4″ COBALT TOOLBITRead moreHSS Cobalt Toolbits
5% Cobalt Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
7/16″ SQ x 4″ HSS TOOLBITRp236.000Read moreHSS Toolbits
HSS Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
7/16″ SQUARE x 12″ KEY STEELRead moreKennedy Industrial Key Steel – Square: Inch
Square â Inch
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request.
