Archives: Products
Showing 12657–12672 of 23773 results
-
6.0M IND’ LOAD STRAP DOUBLE HOOK 1000KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
6.0M IND’ LOAD STRAP DOUBLE HOOK 1500KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
6.0M IND’ LOAD STRAP DOUBLE HOOK 3000KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
6.0M INDUSTRIAL LOAD STRAP PLAIN END 1000KGRead moreLoad Straps
Supplied as a single strap with ratchet unit attached to one end.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
6.0M INDUSTRIAL LOAD STRAP PLAIN END 800KGRead moreLoad Straps
Supplied as a single strap with ratchet unit attached to one end.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
6.0mm (SET OF 27) LETTERPUNCHESRead moreHand Stamps
Positive Indent (Standard)
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. -
6.0mm (SET OF 27) LETTERPUNCHESRead moreSenator Letter & Number Stamps
Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 – 60HRC.
Type of characters according to DIN 1451. -
6.0mm (SET OF 27) LOW STRESS LETTER PUNCHESRead moreKennedy Positive Indent Low Stress Punches
For use on brittle material to avoid damage.
-
6.0mm (SET OF 9) FIGURE PUNCHESRead moreHand Stamps
Positive Indent (Standard)
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. -
6.0mm (SET OF 9) FIGURE PUNCHESRead moreSenator Letter & Number Stamps
Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 – 60HRC.
Type of characters according to DIN 1451. -
6.0mm (SET OF 9) LOW STRESS FIGURE PUNCHESRead moreKennedy Positive Indent Low Stress Punches
For use on brittle material to avoid damage.
-
6.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Metric
Regular Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
6.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRp464.000Read moreSherwood Carbide Micrograin Plain Shank Slot Drills 2 Flute Ball Nosed
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
6.0mm 2FL CARBIDE AL-KARB MILLING CUTTERRead moreKennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric
Short Series – 2 Flute – Metric
Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these materialÂs as the flute design allows maximum chip removal.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
6.0mm 2FL DOUBLE END CARBIDE SLOT DRILLRead moreKennedy Solid Carbide Micrograin Plain Shank Slot Drills Double Ended, 2 Flute: Regular Series, Metric
Double Ended – Regular Series – Metric
2 Flute
For maximum strength when milling harder materials where rapid swarf removal is not needed. Manufactured to Ansi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
6.0mm 2FL L/S B/NOSE CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Long Series, Metric
Long Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.