Archives: Products
Showing 12433–12448 of 23773 results
-
5mmx57mm O/A HSS-COBALT 4FL PL/SH END MILLRp244.000Add to cartHSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric
Regular Length
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
5mmx68mm O/A HSS-COBALT 4FL PL/SH END MILLRead moreSherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
5mmx75mm HEXAGON BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
5mmx75mm SPLINE BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Spline
Spline
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
5MT x 3JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
5MT x 5JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
5oz MAGNETIC TACK HAMMERHICKORY SHAFTRead moreMagnetic Tack Hammers
Hickory Shaft
For holding and driving tacks. -
5oz PLUMB BOBRead moreKennedy Plumb Bobs
Corrosive resistant epoxy coated with brass screwcap. For establishing vertical datum line
without the use of a level. -
5PC 1/4″-7/8″ OFFSET RATCHET RING SPANNER SETRead moreReversible Ratchet Ring Wrenches, 25° Offset – Sets
25° Offset: Sets
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.Sets Contents:
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 17 x 19 and 21 x 22mm.
5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″. -
5PC 1/4″-7/8″ STRAIGHT RATCHET RING SPANNER SETRead moreKennedy Reversible Ratchet Ring Wrenches, Straight – Sets
Straight: Sets
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.Sets
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 17 x 19 and 21 x 22mm
5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″ -
5X HAND MAGNIFIER 50mm DIAMETERRp75.000Add to cartKennedy Hand Magnifiers
Plastic lightweight magnifiers. Used to provide a clear crisp enlarged image. Used for
inspection of finished parts, enlarging small text andâpictures etc. -
5×1/4×7/8″ A30RBF DPC GRINDING DISCRead moreDepressed Centre Cutting & Grinding Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 27 Depressed Centre Grinding
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.Optimum angle for use 25 to 35°.
-
5×1/8×7/8″ A30RBF CUTTING DISCRead moreType 42 Depressed Centre Cutting
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 42 Depressed Centre Cutting
Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding. -
5×1/8×7/8″ A30RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
5×1/8×7/8″ C24TBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
5x10mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015.