Archives: Products
Showing 11489–11504 of 23773 results
-
5/16″ SQUARE x 12″ KEY STEELRead moreKennedy Industrial Key Steel – Square: Inch
Square â Inch
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
5/16″ STEEL BALLS GRADE G100 (PACK 25)Read moreQualfast Steel Balls – Inch
Inch
Low carbon case hardened steel balls are for general use in castors, conveyors, non-precision bearings and any slow rotating parts. They have resistance to shock loads with a good load carrying ability and excellent resistance to surface wear. The G100 standard ball is of a high spherical standard. -
5/16″ T-HANDLE BALL DRIVERRead moreKennedy Hexagon T-Handle Ball Drivers – Inch
Inch
Manufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. -
5/16″ TiN TIPPED JOBBER DRILLRead moreHSS TiN Tipped Jobber Drills – Inch
Inch
Bright body with TiN coating on working part. For drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: normal, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328, DIN 338. -
5/16″ UNC x 3FT MILD STEEL STUDDINGRead moreHigh Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: UNC
Mild Steel – Grade 4.6 Self-Colour: UNC
Colour-coded at each end of length for easy identification as shown. -
5/16″ UNC x 3FT MILD STEEL STUDDING ZINC PLATEDRead more
High Quality Screwed Studding – Mild Steel, Grade 4.6 Zinc-Plated: UNC
Mild Steel, Grade 4.6 Zinc-Plated: UNC
Colour-coded at each end of length for easy identification as shown. -
5/16″ UNF x 3FT MILD STEEL STUDDINGRead more
High Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: UNF
Mild Steel – Grade 4.6 Self-Colour: UNF
Colour-coded at each end of length for easy identification as shown. -
5/16″ WHIT DEEP IMPACT SKT 1/2 SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive BSW Size, Deep Length, 6-Point
1/2â Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
5/16″ WHIT IMPACT SOCKET1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Inch Size, Standard Length, 6-Point
1/2″ Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
5/16″ WHIT SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
5/16″ WHIT SOCKET 1/2″ SQUARE DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
5/16″ WHIT SOCKET 3/8″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
5/16″ x 200mm O/A HSS S/S DRILLRead moreExtra Length Straight Shank Drills
For steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.
Point angle: 118°. Helix angle: normal.
Web thickness: standard.
Relief angle: 10°-20°.
Tolerance of diameter: h8.
Tolerance of shank: f11. To BS 328 : Part 1 : 1986. -
5/16″ x 200mm O/A HSS TAPER SHANK DRILLRead moreSherwood HSS Extra Length Taper Shank Drills, 1 Morse Taper – Inch
Series 2806, 2809, 2816, 2839, 2846, 2849 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. -
5/16″ x 250mm O/A HSS S/S DRILLRead more
Extra Length Straight Shank Drills
For steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.
Point angle: 118°. Helix angle: normal.
Web thickness: standard.
Relief angle: 10°-20°.
Tolerance of diameter: h8.
Tolerance of shank: f11. To BS 328 : Part 1 : 1986. -
5/16″ x 25mm SCREWDRIVER BIT 1/4″ HEXRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.