Archives: Products

Showing 11313–11328 of 23773 results

  • 5.50mm HSS S/S SP/FL MACHINE REAMER
    Rp698.000

    Straight Shank Machine Reamers

    Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.

    Metric Tolerances (to H7)
    Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.
    Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: High +0.012, Low -0.006.
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: High +0.015, Low -0.008.

    Read more
  • 5.50mm HSS S/S STUB DRILL
    Rp246.000

    Sherwood HSS General Purpose Stub Drills – Metric Sizes

    Series S100 – Metric
    General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328: Part 1: 1986/DIN 1897.

    Read more
  • 5.50mm HSS SP/FL PARALLEL HAND REAMER
    Rp564.000

    Straight Shank Parallel Hand Reamers

    Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
    Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
    Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

    Read more
  • 5.50mm HSS T/S DRILL
    Rp159.000

    HSS Taper Shank Drills, 1 Morse Taper – Metric

    To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8.
    Manufacturing Standard: DIN 345.

    Read more
  • 5.50mm HSS T/S SP/FL MACHINE REAMER

    Taper Shank Machine Reamers

    Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.

    Tolerances (to H7)
    Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
    Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
    Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
    Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
    Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

    Read more
  • 5.50mm HSS-COBALT S/S SP/FL CHUCKING REAMER

    Cobalt Straight Shank Chucking Reamers

    Manufactured to DIN 212.

    Tolerances (to H7)
    Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.
    Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000.

    Read more
  • 5.50mm TiN COATED JOBBER DRILL
    Rp62.000

    SwissTech HSS TiN Coated Jobber Drills

    Series 1001
    General purpose drill, to drill steels with a tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. TiN coating provides longer tool life. Point angle: 118°, helix angle: normal, web thickness: normal, relief angle: normal, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to DIN 338 RN, DIN 338.

    Read more
  • 5.50mm TiN TIPPED JOBBER DRILL
    Rp36.000

    SwissTech HSS Straight Shank TiN Tipped Jobber Drills – Metric

    Metric
    Bright body with TiN coating on working part. For drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: normal, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328, DIN 338.

    Read more
  • 5.50mm VA HI-HELIX FOR STAINLESS DRILL

    SwissTech HSS-Co TiN Coated High Helix Drills, Straight Shank

    Series 1060
    Heavy duty drill for stainless steel, heat and acid-resistant steels, short chipping and high strength steels. High heat resistance allows drilling in titanium and titanium alloys. TiN coating provides longer tool life. Point angle: 130°. Helix angle: high. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufactured to DIN 338RN.

    Read more
  • 5.50mm x 150mm O/A HSS TAPER SHANK DRILL

    HSS Extra Length Taper Shank Drills – Sherwood Standard

    General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to Sherwood Standard. (For BS328 and *DIN1870 lengths See Below).

    Read more
  • 5.50mm x 200mm O/A HSS S/S DRILL
    Rp111.000

    HSS Extra Length Drills – Steam Tempered

    General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.

    Read more
  • 5.50mm x 250mm O/A HSS S/S DRILL
    Rp174.000

    HSS Extra Length Drills – Steam Tempered

    General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.

    Read more
  • 5.50mm x 300mm O/A HSS S/S DRILL

    HSS Extra Length Drills – Steam Tempered

    General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.

    Read more
  • 5.5mm CARBIDE S/S JOBBER DRILL

    Solid Carbide Jobber Drills

    For drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118°. Tolerance of diameter: h7. Tolerance of shank: h6.
    Supply unit. All diameters – 1 pce. Manufacturing Standard: DIN 338, DIN338.

    Read more
  • 5.5mm CARBIDE S/S STUB DRILL

    Kennedy Solid Carbide Stub Drills – Metric

    Metric
    For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

    Tolerances:
    Cutting Dia. + 0.000mm – 0.015mm.
    Shank Dia. + 0.000mm – 0.030mm.

    Read more
  • 5.5mm CHROME VANADIUM COMBINATION SPANNER

    Kennedy Industrial Combination Spanners – Metric

    Metric
    Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
    Conform to:
    5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
    26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
    1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
    9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop