Archives: Products
Showing 10641–10656 of 23773 results
-
40mm ROUND WIRE NAILS (500gm)Read moreRound Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
40mm ROUND WIRE NAILS (5KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
40mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm. -
40mm SLIMLINE BRASS PADLOCK STEEL SHACKLERead moreBrass Slimline
Solid brass body with a hardened steel changeable shackle. For indoor and outdoor use on minimum to medium security items.
-
40mm STD BRASS PADLOCK LONG HDN SKLERead moreBrass Padlocks
Solid brass body with a hardened steel shackle and a double locking mechanism. For indoor and outdoor use on minimum to medium security items. 20mm: 3 pin cylinder. 30 and 40mm: 4 pin cylinder, 50 and 60mm: 5 pin cylinder. *Single locking only.
-
40mm XP-90C WELDON END MILL (16)Rp5.659.000Read moreIndexa XP-90C âAPTâ 90° Shell Mills – For AP_T 16 Inserts
XP-90C End Mills For AP_T 16 Inserts
Positive 90° approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
Insert Size: APXT 16. Feed Per Tooth (Fz) mm: 0.10 – 0.30. -
40mmx25mm FELT FLAP WHEEL 6mm SHANKRead moreYork Felt Flap Wheels
Made of pure wool in a variety of sizes and shapes. The mandrels are exactly centred for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.
Shank: 6mm. -
40mmx30mm FELT FLAP WHEEL 6mm SHANKRead moreYork Felt Flap Wheels
Made of pure wool in a variety of sizes and shapes. The mandrels are exactly centred for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.
Shank: 6mm. -
40×1.00x10mm HSS SLITTING SAW 64TRead moreHSS Slitting Saws Fine/Coarse
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
40×1.60x10mm HSS SLITTING SAW 64TRead moreHSS Slitting Saws Fine/Coarse
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
40x10mm 30SWG SHAFT MOUNTED CUP BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Cup Brushes – Shaft Mounted
For all round use, ideal for work on larger surfaces removing burrs, rust and paint. 6mm Shanks
30 SWG -
40x10mm FLAP WHEEL 6mm SHANK GRIT 80Read moreYork Flap Wheels – 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6âs. Recessed hub design for maximum access in tight corners.
Applications
Final finishing of metal surfaces. Mis-match removal and deburring on machined components. Blending and finishing tool, tubes, dies, moulds, channels. Edge blending and cleaning. Surface preparation prior to painting and plating. Can be used on wood, plastic and fibreglass. -
40x1170mm BROWN NYLON WEBBING BELTRead moreKennedy Polyester & Nylon Belts
Adjustable webbing. Riveted for added strength and support.
-
40x1170mm HEAVY DUTY TANLEATHER BELTRead moreLeather Belts – Heavy Duty
Heavy duty natural split leather with heavy buckle and retaining loop.
-
40×13.5mm 30SWG SHAFT MOUNTED BRUSHRead moreWire Wheels
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes – Shaft Mounted
Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG. -
40x15mm AL/OX FLAP WHEELP120-6mm SHANKRead moreYork Flap Wheels – 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6âs. Recessed hub design for maximum access in tight corners.
Applications
Final finishing of metal surfaces. Mis-match removal and deburring on machined components. Blending and finishing tool, tubes, dies, moulds, channels. Edge blending and cleaning. Surface preparation prior to painting and plating. Can be used on wood, plastic and fibreglass.