Archives: Products
Showing 10481–10496 of 23773 results
-
4″ (100mm) THREE SQUARE SMOOTH ENGINEERS FILERp54.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
4″ (100mm) WARDING BASTARD ENGINEERS FILERp39.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
4″ (100mm) WARDING SECOND ENGINEERS FILERp41.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
4″ (100mm) WARDING SMOOTH ENGINEERS FILERp42.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
4″ 10 BLADE IMPERIAL FEELER GAUGERead moreKennedy Feeler Gauges – Inch
Hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Inch: Manufactured to BS 957: 2008 Part 1. 4â Blade length.
Range: 10, 18 and 26 Blade: .0015â – .025â. -
4″ 10 BLADE METRIC FEELER GAUGERp201.000Add to cartKennedy Feeler Gauges – Metric
Hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Metric: Manufactured to BS 957: 2008 Part 1 (Metric).
Range:
10 Blade: .05 – .80mm.
13 and 20 Blade: .05 – 1mm. -
4″ 13 BLADE METRIC FEELER GAUGERp259.000Add to cartKennedy Feeler Gauges – Metric
Hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Metric: Manufactured to BS 957: 2008 Part 1 (Metric).
Range:
10 Blade: .05 – .80mm.
13 and 20 Blade: .05 – 1mm. -
4″ 18 BLADE IMPERIAL FEELER GAUGERead moreKennedy Feeler Gauges – Inch
Hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Inch: Manufactured to BS 957: 2008 Part 1. 4â Blade length.
Range: 10, 18 and 26 Blade: .0015â – .025â. -
4″ 2-JAW DOUBLE ENDED MECHANICAL PULLERAdd to cartKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
4″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERAdd to cartKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions. -
4″ 20 BLADE METRIC FEELER GAUGERp418.000Add to cartKennedy Feeler Gauges – Metric
Hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Metric: Manufactured to BS 957: 2008 Part 1 (Metric).
Range:
10 Blade: .05 – .80mm.
13 and 20 Blade: .05 – 1mm. -
4″ 26 BLADE IMPERIAL FEELER GAUGERp600.000Add to cartKennedy Feeler Gauges – Inch
Hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.
Inch: Manufactured to BS 957: 2008 Part 1. 4â Blade length.
Range: 10, 18 and 26 Blade: .0015â – .025â. -
4″ 3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
4″ ADJUSTABLE STEEL SQUARERead moreKenendy Adjustable Steel Squares
Made from hardened steel and precision ground. Supplied with three fully adjustable blades. One plain, parallel blade for use as a conventional engineerâs square, 30° and 45°
bevel edged blade for checking angles, and a narrow blade graduated metric and imperial. -
4″ BLADE LOCKING KNIFE WOODEN HANDLERead moreSenator Locking Knife
With rosewood handle. Stainless steel blade and brass fittings.
-
4″ BRICK BOLSTERRead moreKennedy Cold Chisels – Chrome Vanadium: Brick Bolster
Brick Bolster – Chrome Vanadium
Used for splitting bricks. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.