Archives: Products
Showing 10001–10016 of 23773 results
-
4-ROW BRASS WIRE SCRATCH BRUSHRead moreWire Scratch Brushes
These brass wire brushes are also used in situations where there could be a potential fire or explosion hazard. Brass wire brushes will not cause a spark. Hardwood handle.
-
4-ROW PLASTIC HANDLE WIRE BRUSH C/W SCRAPERRead moreWire Scratch Brushes
for cleaning all rough surfaces on a range of materials to remove paint, dirt, rust and stubborn deposits. Plastic handled with cast steel bristles for general purpose work.
*with scraper -
4-ROW PLASTIC HANDLE WIRE SCRATCH BRUSHAdd to cartWire Scratch Brushes
for cleaning all rough surfaces on a range of materials to remove paint, dirt, rust and stubborn deposits. Plastic handled with cast steel bristles for general purpose work.
*with scraper -
4-ROW STAINLESS STEEL WIRE SCRATCH BRUSHRead moreWire Scratch Brushes
Stainless steel wire scratch brushes are used on stainless steel and aluminum fabricated products – predominantly in stainless steel welding processes where the use of an ordinary wire scratch brush would create the risk of contamination of the weld. Hardwood handle.
-
4-ROW WIRE SCRATCH BRUSH WITH SCRAPERRead moreWire Scratch Brushes
Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks.
-
4-ROW WIRE SCRATCH BRUSH- PLAIN BACKRead moreWire Scratch Brushes
Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks.
-
4-SHELF H/D RACK 1040x430x1830mm 455KG PER SHELFRead moreMatlock Heavy Duty Racking – 4 Shelves
4 Shelves
This racking system can be assembled in five ways and has uprights and beams made of heavy gauge steel with a corrosion resistant powder coating and rubber feet to protect the floor. It is easy to assemble, interlocking with just two nuts and bolts joining one upright frame to the next. The 430mm deep shelves are easily adjustable and can take up to 455kg UDL (uniformly distributed load) with the rack being fixed to a wall. -
4-TON RAM 4″/100mm STROKE REPAIR KITRead moreSpare Parts for Hydraulic Body Repair Kits
Body Repair Kit Spares to suit Kennedy Hydraulic Body Repair Kits
-
4-TONNE AXLE STANDS (PR)Read moreKennedy Ratcheting Axle Stands
Suitable for supporting raised vehicles or equipment. Protective red enamel coating. 10-position ratchet design that automatically locks when raised.
-
4-WAY JUNCTION BOX C/W 3M CABLE & PLUG 110VRead more4-Way Junction Box with Cable & Plug
A standard, steel cased 4-way 110v, 16amp distribution box with 5m of 1.5mm cable and
16amp plug. -
4.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated
Series 15 – Regular Length
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
4.0 SCR LONG 3FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- Uncoated
Series 34 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
4.0 SCR LONG 3FL SLOT DRILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- TiALN Coated
Series 34 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
4.0 SCR LONG 3FL SLOT DRILL-TICN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- TiCN Coated
Series 34 – Long Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
4.0 SCR LONG END MILL-8%CORead moreSwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 37, Long – Uncoated
Series 37 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
4.0 SCR SHORT 2FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated
Series 28 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).