Archives: Products
Showing 9233–9248 of 23773 results
-
30-35mm 3 POINT INTERNAL MICROMETERRead moreOxford 3 Point Bore Individual Micrometers
Individual Micrometers
Designed to self-centre, for accurate measuring of bores. Extension rods for measuring 170mm deep on 11 – 20mm and 220mm deep on 20 – 40mm. Satin finish, fitted with knurled ratchet stop. -
30.00mm 90DEG HSS-COBALT S/S COUNTERSINK DIN335Rp761.000Read moreHSS-Co 5% 90° Countersinks
For all ferrous and non-ferrous metals as well as for hard plastics. General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over.
Made to DIN 335. -
30.00mm HSS 1/2″ PARALLEL SHANK DRILLRp783.000Read moreHSS Reduced Shank Drills (Blacksmiths)
1/2â parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2â. Point angle: 118°, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: 0.01/0.08. Manufactured to works standard.
-
30.00mm HSS SP/FL PARALLEL HAND REAMERRp3.042.000Read moreStraight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. -
30.00mm HSS T/S DRILLRp1.139.000Read moreSherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
30.00mm HSS T/S SP/FL MACHINE REAMERRp3.481.000Add to cartTaper Shank Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.
Tolerances (to H7)
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016. -
30.00mm x 400mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1. -
30.00mm x 500mm O/A HSS TAPER SHANK DRILLRead more
HSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1. -
30.50mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
30″ BOWSAW BLADES HARDPOINT FILED TOOTHRead moreRutland Replacement Blades for Bow Saws
Rutland Bow Saw Replacement Blades
-
30″ CANVAS TOOL BAGRead moreCanvas Holdall
Manufactured from heavy duty water resistant canvas. Handles wrap underneath the bag for added strength, fitted with a heavy duty zip.
-
30″ HICKORY SLEDGE HAMMER SHAFTRead moreHammer Shafts
Made from genuine hickory with a waxed finish. Manufactured to BS 3823.
-
30″ LOGGERS HEAVY DUTY BOWSAWRead moreRutland Bow Saws
All models feature lever tension handles for rapid blade change and rigid oval section frames. Supplied with clip-on plastic blade protectors to prevent injuries during transportation and storage. Suitable for cutting dry and green wood. Suitable for gardeners, landscapers, builders, farmers etc. Standard duty suitable for occasional use e.g. DIY, gardener etc. Heavy-duty suitable for regular use e.g. professional landscapers etc.
Triangular Pattern – Low profile frame for use in confined areas, for example among tree branches.
Loggers Pattern – Full frame suitable for heavier sawing of logs, tree trunks etc. -
30″ LOW TENSILE BOLT CUTTER CENTRE CUTRead moreKennedy Low Tensile Bolt Cutters – Centre Cut
Drop forged hardened carbon steel suitable for round and flat sections. With adjustable arms. With cushion grips. 300mm model has cast handles – all other sizes have tubular handles for maximum strength combined with low weight. Conform to JIS B4643.
-
30″x45″x54″ 240LTR M/D WHEELIE BIN LINERS (PK-100)Read moreWheelie Bin Liners
Heavy gauge refuse sacks. Specifically designed for use with wheelie bins. Packs of 100.
-
30″x46″x54″ 240L L/D BLKWHEELIE BIN LINERS (100)Read moreWheelie Bin Liners
Heavy gauge refuse sacks. Specifically designed for use with wheelie bins. Packs of 100.