Archives: Products
Showing 8689–8704 of 23773 results
-
3/4″ SQUARE MALE ADAPTOR 1/2″ SQ DRRead moreFemale/Male Converters
Chrome vanadium. For using a combination of square drive socketry in the same application.
-
3/4″ SQUARE MALE ADAPTOR1″ SQ DRRead moreKennedy Drive Converters, 3/4″
For using a combination of square sockets in one application.
-
3/4″ SQUARE x 12″ KEY STEELRead moreKennedy Industrial Key Steel – Square: Inch
Square â Inch
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
3/4″ UNC x 3FT MILD STEEL STUDDINGRead moreHigh Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: UNC
Mild Steel – Grade 4.6 Self-Colour: UNC
Colour-coded at each end of length for easy identification as shown. -
3/4″ UNC x 3FT MILD STEEL STUDDING ZINC PLATEDRead more
High Quality Screwed Studding – Mild Steel, Grade 4.6 Zinc-Plated: UNC
Mild Steel, Grade 4.6 Zinc-Plated: UNC
Colour-coded at each end of length for easy identification as shown. -
3/4″ WHIT CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Whitworth
Whitworth
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
3/4″ WHIT DEEP IMPACT SKT 1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive BSW Size, Deep Length, 6-Point
1â Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3/4″ WHIT DEEP IMPACT SKT 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive BSW Size, Deep Length, 6-Point
1/2â Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3/4″ WHIT DEEP IMPACT SKT 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive BSW Size, Deep Length, 6-Point
3/4″ Drive BSW Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3/4″ WHIT IMPACT SOCKET 1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive BSW Size, Standard Length, 6-Point
1â Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3/4″ WHIT IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Inch Size, Standard Length, 6-Point
1/2″ Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3/4″ WHIT IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive BSW Size, Standard Length, 6-Point
3/4″ Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
3/4″ WHIT SOCKET 1/2″ SQDRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
3/4″ x 315mm O/A HSS TAPER SHANK DRILLRead moreSherwood HSS Extra Length Taper Shank Drills, 2 Morse Taper – Inch
Series 2806, 2809, 2816, 2839, 2846, 2849 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. -
3/4″ x 400mm O/A HSS TAPER SHANK DRILLRead more
Sherwood HSS Extra Length Taper Shank Drills, 2 Morse Taper – Inch
Series 2806, 2809, 2816, 2839, 2846, 2849 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. -
3/4″ x 7/8″ A/F CH/VAN O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – AF
AF
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth.