Archives: Products
Showing 8593–8608 of 23773 results
-
3/32″ HSS-COBALT KC3 THROWAWAY CUTTERRead moreKennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated
Short Series – Inch
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4â,
Inch Tolerances:
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.0005, -0.0013.Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
-
3/32″ HSS-COBALT L/S KC3 THROWAWAY CUTTERRead moreKennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated
Long Series – Inch
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4â.
Inch Tolerances:
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.0005, -0.0013.Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
-
3/32″ HSS-COBALT SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Inch
Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Inch Tolerances
Diameter: up to 1 1/2â. Tolerance: +0.0025, -0.0005.
Diameter: Over 1 1/2â. Tolerance: +0.0050, -0.0000. -
3/32″ NOZZLE FOR 569-300 RIVET GUN (2.4mm)Read moreSpare parts for Heavy-Duty Lever Action Riveter
Replecement Jaws and Nozzles for Kennedy Heavy Duty Lever Action Riveter (KEN-569-3000K) – illustrated.
-
3/32″ PUNCH FOR KEN5607800K HOLE PUNCHRead moreKennedy Power Hole Punch Kit
This 14 piece punch kit is suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.
Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes.
Adjustable depth gauge. Suitable for materials up to 14 gauge. Die and punch sizes: 2.38, 3.18, 3.97, 4.76, 5.56, 6.35, & 7.14mm. (3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 9/32″)
-
3/32″ SQUARE x 12″ KEY STEELRead moreKennedy Industrial Key Steel – Square: Inch
Square â Inch
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
3/32″ STEEL BALLS GRADE G100 (PACK 50)Read moreQualfast Steel Balls – Inch
Inch
Low carbon case hardened steel balls are for general use in castors, conveyors, non-precision bearings and any slow rotating parts. They have resistance to shock loads with a good load carrying ability and excellent resistance to surface wear. The G100 standard ball is of a high spherical standard. -
3/32″ STUB CENTRING DRILLRead moreSherwood HSS (SCD) Stub Centring Drills – Inch
135° Split Point – Series S510 – Inch
Stub centering drills designed for sheet metal drilling and spot centering operations with a strong supporting web and a reduced chisel edge to help penetration. -
3/32″ T-HANDLE BALL DRIVERRead moreKennedy Hexagon T-Handle Ball Drivers – Inch
Inch
Manufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. -
3/32″ TiN TIPPED JOBBER DRILLRp26.000Read moreHSS TiN Tipped Jobber Drills – Inch
Inch
Bright body with TiN coating on working part. For drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: normal, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328, DIN 338. -
3/32″ x 125mm O/A HSS S/S DRILLRead moreExtra Length Straight Shank Drills
For steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.
Point angle: 118°. Helix angle: normal.
Web thickness: standard.
Relief angle: 10°-20°.
Tolerance of diameter: h8.
Tolerance of shank: f11. To BS 328 : Part 1 : 1986. -
3/32″ x 160mm O/A HSS S/S DRILLRead more
Extra Length Straight Shank Drills
For steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.
Point angle: 118°. Helix angle: normal.
Web thickness: standard.
Relief angle: 10°-20°.
Tolerance of diameter: h8.
Tolerance of shank: f11. To BS 328 : Part 1 : 1986. -
3/32″ x 25mm SCREWDRIVER BIT 1/4″ HEXRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
3/32″x 0.19″ 100DEG HSS-COBALT 3FL PILOTED C/SINKRead moreHSS-Co 5% 3 Flute Piloted Countersinks
For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″
Inclined Angles for Countersunk Socket Head Screws
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°. -
3/32″x 3/16″ 100DEG HSS-COBALT 3FL PILOTED C/SINKRp190.000Read moreHSS-Co 5% 3 Flute Piloted Countersinks
For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″
Inclined Angles for Countersunk Socket Head Screws
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°. -
3/32″x 3/16″ 120DEG HSS-COBALT 3FL PILOTED C/SINKRp190.000Read moreHSS-Co 5% 3 Flute Piloted Countersinks
For the production of high precision concentrically centred countersinks in most metals where pilot holes have been pre-drilled. Shank diameter: 3/16″
Inclined Angles for Countersunk Socket Head Screws
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: up to M20. Countersink Angle: 90°.
Thread Series: Metric. Standard: BS EN ISO 10642. Thread Size: over M20. Countersink Angle: 60°.
Thread Series: UNC/F. Standard: ANSI B 18.3. Thread Size: No.0 to 1″. Countersink Angle: 82°.
Thread Series: BSW/F. Standard: BS 2470. Thread Size: 1/8″ to 1″. Countersink Angle: 90°.
Thread Series: BA. Standard: BS 2470. Thread Size: 8BA to 0BA. Countersink Angle: 90°.