Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 8433–8448 of 23773 results

  • 3/16-3/4″ BSF 28-PCE HSS THREADING SET IN CASE
    Rp7.038.000

    BSF Threading Set

    BSF Threading Set 3/16” – 3/4” BSF:
    HSSGT Straight Flute Taps:
    Taper: 3/16” x 32, 1/4” x 26, 5/16” x 22, 3/8” x 20.
    Second: 3/4” x 12, 7/16” x 18, 5/8” x 14, 1/2” x 16.
    Plug: 3/16” x 32, 1/4” x 26, 5/16” x 22, 3/8” x 20.
    Bar Type Tap Wrenches: 1/16” – 1/4” and 1/4” – 3/4”.
    Tapping Drills to Suit: HSS S/S. 4.00, 5.30, 6.80, 8.30, 9.70, 11.10mm
    HSS 1” O/D Split Dies: 1/4” x 26, 5/16” x 22 and 3/8” x 20.
    Diestock: 1” O/D.
    HSS Die Nuts: 7/16” x 18, 1/2” x 16, 5/8” x 14 and 3/4” x 12.

    Read more
  • 3/16-3/4″ BSW 28-PCE HSSTHREADING SET IN CASE
    Rp7.038.000

    BSW Threading Set

    BSW Threading Set 3/16” – 3/4” BSW:
    HSSGT Straight Flute Taps:
    Taper: 3/16” x 24, 1/4” x 20, 5/16” x 18, 3/8” x 16.
    Second: 7/16” x 14, 1/2” x 12, 5/8” x 11, 3/4” x 10.
    Plug: 3/8” x 16, 5/16” x 18, 1/4” x 20, 3/16” x 24.
    Bar Type Tap Wrenches: 1/4” – 3/4” and 1/16” – 1/4”.
    Tapping Drills to Suit: HSS S/S. 3.70, 5.10, 6.50, 7.90, 9.30, 10.50mm
    HSS 1” O/D Dies: 1/4” x 2, 5/16” x 18 and 3/8” x 16.
    Diestock: 1” O/D.
    HSS Die Nuts: 7/16” x 14, 1/2” x 12, 5/8” x 11 and 3/4” x 10.

    Read more
  • 3/16-3/4″WHIT CV RING SPANNER SET 5PC

    Kennedy Double Ended Ring Spanners – Sets

    Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth.

    Sets
    5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″.
    10 Piece AF: 1/4″ x 5/16″, 5/16″ x 3/8″, 3/8″ x 7/16″, 7/16″ x 1/2″, 1/2″ x 9/16″, 9/16″ x 5/8″, 5/8″ x 11/16″, 11/16″ x 3/4″, 3/4″ x 7/8″ and 15/16″ x 1”.
    5 Piece BSW: 3/16″ x 1/4″, 5/16″ x 3/8″, 7/16″ x 1/2″, 9/16″ x 5/8″ and 11/16″ x 3/4″ BSW.
    7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
    11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.

    Read more
  • 3/16″ 2FL BALL NOSE CARBIDE SLOT DRILL

    Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch

    Regular Series – 2 Flute – Inch
    For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

    Inch Tolerances
    Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003.

    Read more
  • 3/16″ 2FL STANDARD CARBIDE SLOT DRILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Inch

    2 Flute: Regular Series – Inch
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 3/16″ 3FL STANDARD CARBIDE SLOT DRILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Inch

    3 Flute: Regular Series – Inch
    Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 3/16″ 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

    4 Flute: Regular Series – Inch
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 3/16″ A/F HEX SOCKET BIT1/4″ SQ DR

    Kennedy Bi-Hexagon Sockets, 1/4″ – Screwdriver Bits

    Screwdriver Bits
    Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.
    Overall length: 37mm.
    Bit length: 19mm.

    Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

    Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

    Read more
  • 3/16″ A/F HEXAGON BALL DRIVER

    Kennedy Hexagon Ball Drivers – Inch

    Inch
    Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.

    Read more
  • 3/16″ A/F HEXAGON L-WRENCH BALL DRIVER

    Kennedy Ball Driver L-Wrenches – Inch

    Inch
    Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish.

    Read more
  • 3/16″ A/F HEXAGON WRENCH

    Kennedy Hexagon Key L-Wrenches: Inch – Standard Length

    Inch – Standard Length
    Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

    Read more
  • 3/16″ A/F LONG ARM HEXAGON WRENCH

    Kennedy Hexagon Key L-Wrenches, Long Arm – Inch

    Inch – Long Arm
    Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

    Read more
  • 3/16″ A/F SINGLE HEX DEEP SOCKET 1/4″ SQ DR

    Kennedy Bi-Hexagon Sockets, 1/4″ – AF

    Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

    Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

    Read more
  • 3/16″ A/F SINGLE HEX SOCKET 1/4″ SQ DR

    Kennedy Bi-Hexagon Sockets, 1/4″ – AF

    Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

    Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

    Read more
  • 3/16″ A/F SOCKET 1/4″ SQDR

    Kennedy Bi-Hexagon Sockets, 1/4″ – AF

    Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

    Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

    Read more
  • 3/16″ BSW x 3FT MILD STEEL STUDDING

    High Quality Screwed Studding – Mild Steel, Grade 4.6 Self-Colour: BSW

    Mild Steel – Grade 4.6 Self-Colour: BSW
    Colour-coded at each end of length for easy identification as shown.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping