Archives: Products
Showing 7729–7744 of 23773 results
-
28.00mm HSS T/S DRILLRp1.049.000Read moreSherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
28.00mm HSS T/S SP/FL MACHINE REAMERRp3.280.000Read moreTaper Shank Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.
Tolerances (to H7)
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016. -
28.00mm x 500mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1. -
28.00mm x 630mm O/A HSS TAPER SHANK DRILLRead more
HSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1. -
28.50mm HSS T/S DRILLRp1.510.000Read more
Sherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
28.5mm DIA SHALLOW POT MAGNETRead moreShallow Pot Magnets
North polarity in centre separated from opposing pole by a continuous slot. For use in areas of restricted height. Supplied with plain bore fixing hole and keeper. Permanently magnetic.
-
28.6×13.0mm CUTx1/4″SK. RM CLASSICAL BITRead moreRouter Cutters
RM Classical Bits
With ball bearing guide. For mounting slotting cutters. Complete with ball bearing which also ensures a constant depth of slot. -
28.6×8.00mm RAD.1/4″SK.ROUNDING OVER BITRead moreRouter Cutters
Two Flute Rounding Over Bits
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work. -
28.6×9.50mm RADx1/4″ SHANK ROUNDING OVER BITRead moreRouter Cutters
Rounding Over Bits
With ball bearing guide for panel and edge moulding. -
280 P20/P30 BRAZED TOOLRead moreKennedy Square Shank Boring Tools Held at 90° in Bar – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
280mm/11″ C-CLAMP GRIP WRENCHRead moreSenator Locking C-Clamps
Wide and deep jaw profile, clear obstacles to firmly clamp sections that a normal grip wrench cannot.
-
280mm/11″ WELDERS CLAMP GRIPRead moreKennedy Weldersâ Clamp
Deep throated, suitable for clamping sheet metal, body panels and sills, with split jaws to allow maximum visibility and access to the working area when welding.
-
280x3mm (11″X1/8″) MOIL POINT CHISELRead morePower Tool Chisels
Makita Style Chisels
For Makita: HM0810, HR3500, HR3520, 8035NB.
17mm Hex Shank with Round Tang & Round Retainer Recess -
280x50mm (11″x2″) WIDE CHISELRead morePower Tool Chisels
Makita Style Chisels
For Makita: HM0810, HR3500, HR3520, 8035NB.
17mm Hex Shank with Round Tang & Round Retainer Recess -
284mm MED. DUTY SPRING LOADED GATE WHEEL BZP GALVRead moreSpring Loaded Gate Wheel – Medium Duty
Fits to the outside edge of the lowest horizontal member of larger gates to support the weight when opening and closing. Complete with all fittings and large diameter (100mm) spring loaded wheel that provides smooth travel over uneven or bumpy ground. Bright zinc plated.
Overall length: 284mm.
-
288 P20/P30 BRAZED TOOLRp278.000Add to cart
Kennedy Square Shank Boring Tools Held at 90° in Bar – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.