Archives: Products
Showing 7121–7136 of 23773 results
-
230×1.9×22.23mm AS46 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
230x280mm WET & DRY SHEETS (PK-25)Read moreSenator Wet & Dry Sheet Kit
Silicon carbide. Waterproof-resin bonded paper. Suitable for wet and dry applications.
For metal and wood giving a high quality surface preparation and an excellent key for following coats.
Contents: Pk-25 (5 of each) P180, P240, P320, P400, P600. All sheets 230 x 280mm. -
230x3x22.23mm A24RBF DPCCUTTING DISCRead moreType 42 Depressed Centre Cutting
Type 42 Depressed Centre Cutting
For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding.
Grade A24/A46 – For general purpose cutting on metals.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230x3x22.23mm A24RBF FLAT CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230x3x22.23mm C24RBF FLAT STONE CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230x6x22.23mm A30TBF DPCGRINDING DISCRead moreDepressed Centre & Flat Reinforced Cutting & Grinding Discs
Type 27 Depressed Centre Grinding
For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.
Optimum angle for use 25 to 35°.
Grade A30/AS30 – For general-purpose use on metals.
INOX – For use on stainless steel (iron, chlorine and sulphur free).Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230x6x22.23mm AS30INOX-BF DPC GRINDING DISCRead moreDepressed Centre & Flat Reinforced Cutting & Grinding Discs
Type 27 Depressed Centre Grinding
For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.
Optimum angle for use 25 to 35°.
Grade A30/AS30 – For general-purpose use on metals.
INOX – For use on stainless steel (iron, chlorine and sulphur free).Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
-
232 P20/P30 BRAZED TOOLRead moreKennedy Straight Recessing Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
-
233mm/9″ PLASTIC PIPE GRIPPING PLIERSRead moreKennedy Plastic Pipe Gripping Pliers
Ideal for screwing and unscrewing plastic pipe joints, round union nuts etc. up to 65mm dia. 4-position adjustable slip joint. Serrated gripping jaws with removable plastic jaw covers. Manufactured from chrome vanadium electric steel, oil-hardened and tempered with bonded vinyl grip for improved comfort and control.
-
235mm POLYETHYLENE FUNNEL WITH ANTI-SPLASH RIMRead moreKennedy Heavy-Duty Plastic Funnels
With anti-splash rims.
-
235×35-15mm AL/OX COARSE SCYTHE STONERead moreScythe Stones
Aluminium Oxide
A general-purpose sharpening stone for agricultural and horticultural tools such as hoes, spades, edgers, clippers and shears.
Size: 235mm flat tapered and 305mm English round. -
236 P20/P30 BRAZED TOOLRp859.000Read more
Kennedy Straight Recessing Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
23mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
23mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982.
