Archives: Products
Showing 6177–6192 of 23773 results
-
2.1/2″ PROFESSIONAL PAINT BRUSHRead moreProfessional Paint Brushes
High quality lacquered wood handles. Chrome plated lapped and pressed ferrules. Long pure black high quality bristles. Hard wearing brushes designed to give long life and the finest of finishes for the true craftsman.
*with plastic handle. -
2.1/2″ SCALE TANG SCRAPER – ROSEWOODRead moreScrapers (Scale Tang)
Heavy duty, with scale tangs, tempered flexible steel blades and polished rosewood handles. Polished sharp blade for removing paint and wall coverings.
-
2.1/2″x1/16″x1″ HSS SLITTING SAW 62TRead moreSherwood HSS Slitting Saws Fine/Coarse – Inch
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
2.1/2″x1/64″x1″ HSS SLITTING SAW 62TRead moreSherwood HSS Slitting Saws Fine/Coarse – Inch
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
2.1/2″x3/32″x1″ HSS SLITTING SAW 26TRead moreSherwood HSS Slitting Saws Fine/Coarse – Inch
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
2.1/2″x3/64″x1″ HSS SLITTING SAW 62TRead moreSherwood HSS Slitting Saws Fine/Coarse – Inch
High speed steel slitting saws are hollow ground to give the clearance necessary for deep cutting. Available in coarse and fine teeth, number of teeth specified below. Supplied with keyways as standard. Manufactured to BS122.
-
2.1/2LB BALL PEIN HAMMER HICKORY SHAFTRead moreBall Pein Hammers
Hickory Shaft
With fine grain, forged steel head, hardened and tempered with polished faces. -
2.1/2LB BALL PEIN HAMMER WOOD SHAFTRp642.000Add to cartEngineerâs Ball Pein Hammers
Ball pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. They are available with a hardwood, hickory, fibreglass or tubular steel shaft.
Hardwood Shaft
With fine grain, forged steel head, hardened and tempered with polished faces. -
2.1/2LB CLUB HAMMER FIBREGLASS SHAFTRead moreClub Hammers
Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.
Fibreglass Shaft
With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the userâs hand and wrist. Reduces operator fatigue and the risk of repetitive strain injury (RSI). -
2.1/2LB CLUB HAMMER HICKORY SHAFTRead moreClub Hammers
Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.
Hickory Shaft
With fine grain, forged steel head, hardened and tempered with polished faces. -
2.1/4-TONNE TROLLEY JACKRead moreTrolley Jack
Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lower. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved.
T238
Type: with case.
Dimensions: 525 x 225 x 145mm.
Maximum load: 2,000kg.
Minimum height: 130mm.
Maximum height: 380mm.T2.249
Type: with case.
Dimensions: 695 x 344 x 180mm.
Maximum load: 2,250kg.
Minimum height: 145mm.
Maximum height: 495mm.T280
Type: long reach.
Dimensions: 1150 x 360 x 210mm.
Maximum load: 2,000kg.
Minimum height: 140mm.
Maximum height: 800mm. -
2.1/4″ A/F OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
-
2.1/4″ A/F RING SLOGGINGWRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
2.1/4″ A/F SOCKET 1″ SQ DRRead moreKennedy Bi-Hexagon Standard Sockets, 1″
Bi-hexagon. (12 point). This range of 1â (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design gives a higher torque than normal sockets. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
2.1/4″x2.1/4″ WRITE-ON GRIPSEAL BAGSRead moreAvon? Gripseal Polythene Bags – Write On
Medium weight. With three write-on stripes. Pack of 1000.
-
2.1/8″ A/F OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.