Archives: Products
Showing 5121–5136 of 23773 results
-
167 K20 BRAZED TOOLRp282.000Read moreKennedy Cranked Turning Tools – K20
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
167mm HORIZONTAL & VERTICAL INDEX UNIT CHUCKRead moreIndexa Horizontal & Vertical Index Unit Chucks
Ideal for indexing items to be machined in pre-set or manually set incremental angles.
Indexing accuracy 25 seconds. Angular indexing through the graduation ring from
0 to 360 degrees in 1 degree increments. Basic indexing by means of a catch device
permitting divisions of 2, 3, 4, 6, 8, 12 and 24 without disassembly. Fitted with standard three jaw self-centring scroll chuck with two sets of jaws, for inside and outside gripping. -
168mm DIA. (6.11/16″) BI-METAL V/P HOLESAWRp1.058.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
16cm (6.1/2″) BARRETTE CUT 2 NEEDLE FILERp19.000Read moreKennedy Precision Hand Files Needle Pattern (Round Handle) – Barrette
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) CROSSING CUT 2 NEEDLE FILERp20.000Read morePrecision Hand Files Needle Pattern (Round Handle) – Crossing
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) CUT 2 ASSORTED NEEDLE FILE SET-12PCERp187.000Add to cartNeedle File Sets
Supplied in PVC Wallet. Manufactured to BS 498:1990. Cut 2.
6 Piece Set (1 of each): Flat, Hand, Half Round, Round, Square, Three Square
12 Piece Set (1 of each): Hand, Flat, Knife, Round, Half Round, Square, Three Square, Crossing, R/Edge Joint, Slitting, Warding, Barrette. -
16cm (6.1/2″) CUT 2 ASSORTED NEEDLE FILE SET-6PCERp90.000Add to cartNeedle File Sets
Supplied in PVC Wallet. Manufactured to BS 498:1990. Cut 2.
6 Piece Set (1 of each): Flat, Hand, Half Round, Round, Square, Three Square
12 Piece Set (1 of each): Hand, Flat, Knife, Round, Half Round, Square, Three Square, Crossing, R/Edge Joint, Slitting, Warding, Barrette. -
16cm (6.1/2″) HALF ROUNDCUT 0 NEEDLE FILERp20.000Read morePrecision Hand Files Needle Pattern (Round Handle) – Half Round
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) HALF ROUNDCUT 2 NEEDLE FILERp20.000Read morePrecision Hand Files Needle Pattern (Round Handle) – Half Round
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) HALF ROUNDCUT 4 NEEDLE FILERp21.000Read morePrecision Hand Files Needle Pattern (Round Handle) – Half Round
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) HAND CUT 0 NEEDLE FILERp15.000Read morePrecision Hand Files Needle Pattern (Round Handle)
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) HAND CUT 2 NEEDLE FILERp15.000Add to cartPrecision Hand Files Needle Pattern (Round Handle)
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) HAND CUT 4 NEEDLE FILERp16.000Read morePrecision Hand Files Needle Pattern (Round Handle)
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) KNIFE CUT 0 NEEDLE FILERp20.000Read moreKennedy Precision Hand Files Needle Pattern (Round Handle) – Knife
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) KNIFE CUT 2 NEEDLE FILERp20.000Read moreKennedy Precision Hand Files Needle Pattern (Round Handle) – Knife
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.
-
16cm (6.1/2″) ROUND CUT 0 NEEDLE FILERp15.000Add to cartKennedy Precision Hand Files Needle Pattern (Round Handle) – Round
Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.