Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 4977–4992 of 23773 results

  • 16.0mm 2FL BALL NOSE CARBIDE SLOT DRILL

    Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Metric

    Regular Series – 2 Flute – Metric
    For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 2FL BALL NOSE CARBIDE SLOT DRILL
    Rp1.687.000

    Sherwood Carbide Micrograin Plain Shank Slot Drills 2 Flute Ball Nosed

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 16.0mm 2FL CARBIDE AL-KARB MILLING CUTTER

    Kennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

    Short Series – 2 Flute – Metric
    Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 2FL L/S B/NOSE CARBIDE SLOT DRILL

    Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Long Series, Metric

    Long Series – 2 Flute – Metric
    For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 2FL L/SERIES CARBIDE SLOT DRILL
    Rp2.632.000

    Kennedy Carbide Micrograin Plain Shank Slot Drills, 2 Flute – Long Series, Metric

    Long Series – 2 Flute – Metric
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 2FL STANDARD CARBIDE SLOT DRILL
    Rp1.476.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 2 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 16.0mm 2FL STANDARD CARBIDE SLOT DRILL
    Rp1.345.000

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Metric

    2 Flute: Regular Series – Metric
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 3FL L/SERIES CARBIDE END MILL
    Rp4.569.000

    Kennedy Carbide Micrograin Plain Shank Slot Drills, 3 Flute – Long Series, Metric

    Long Series – 3 Flute – Metric
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 3FL STANDARD CARBIDE SLOT DRILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric

    3 Flute: Regular Series – Metric
    Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 3FL STANDARD CARBIDE SLOT DRILL
    Rp1.687.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 3 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 16.0mm 45DEG M/FLUTE HI-HELIX END MILL Q-COAT

    SwissTech Carbide Plain Shank End Mills High Helix

    Centre cutting.
    To Manufacturers standards.
    Cutting diameter to e8.
    Shank diameter to h6.
    EHQ-6*PR Carbide Q-Coat.
    *Number varies according to the number of flutes.

    Series 72 – Regular Length

    Read more
  • 16.0mm 4FL BALL NOSE CARBIDE END MILL
    Rp2.409.000

    Sherwood Solid Carbide Micrograin Plain Shank End Mills 4 Flute Ball Nosed

    Regular Series
    For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 16.0mm 4FL L/S B/NOSE CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 4 Flute – Long Series, Metric

    Long Series – 4 Flute – Metric
    For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 4FL L/SERIES CARBIDE END MILL
    Rp3.071.000

    Kennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric

    Long Series – 4 Flute – Metric
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 16.0mm 4FL STANDARD CARBIDE END MILL
    Rp2.108.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 16.0mm 4FL STANDARD CARBIDE END MILL
    Rp2.241.000

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

    4 Flute: Regular Series – Metric
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping