Archives: Products

Showing 4833–4848 of 23773 results

15mm DIN 472 INTERNAL CIRCLIPS (PACK 50)

Qualfast Circlips: Internal

Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. Internal DIN 472.

Read more
15mm DROP FORGED COMBINATION SPANNER

Senator Combination Spanners – Metric

Manufactured from drop forged steel with 15Â° cranked heads. Conform to ASME B107.6.

Read more
15mm EXTRACTOR SOCKET 3/8″ SQ. DRIVE

Kennedy Impact 3/8″ Sq. Dr. Extractor Sockets

Square Drive Impact Extractor Sockets
Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The ejector pin is to drive out the fasteners from sockets, once removed.
Contents: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm extractor sockets plus ejector pin.

Read more
15mm FLEX HEAD RATCHET WRENCH

Kennedy Professional Flex-Head Ratchet Combination Spanners – Metric

Metric Ratchet Combination Spanners
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5Â° movement to operate ratchet. Thin wall design for greater access. Head flexes up to 90Â° in either direction. Conform to ASME B107.6.

Read more
15mm FLEXI RING END SOCKET 1/2″ S/D

Kennedy Flexi-Ring End Sockets, 1/2″

Made from polished chrome vanadium. These tough flexi-ring end sockets are designed to allow access over long studs and for awkwardly positioned nuts and bolts. Swivels through 220Â°.

Read more
15mm FORSTNER BIT

Senator Forstner Bits

For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar drills to bore a wide range of timber, plastics and other materials.

Read more
15mm GO THROUGH SOCKET

Kennedy Go-Thruâ¢ Sockets for Ratchet Combination Spanner Set

Replacement Go-Thruâ¢ Sockets to suit Ratchet Combination Spanner Set
Quattro 4-in-1 – Q23M: This wrench set for 10 to 19mm applications comprises open ended wrenches, ratchet ring wrenches, Go-Thruâ¢ single hex ratchet wrenches and 1/4â, 3/8â and 1/2â square drive ratchets. All are made from chrome vanadium and are fully plated with a mirror finish. Supplied in a heavy duty fitted metal storage case with locking lid and carry handle.

Read more
15mm GUIDE FOR KEN588-6200K BENDER

Kennedy Multi Bender Pipe Tool – Accessories

Accessories for Kennedy Multi Bender Pipe Tool

Read more
15mm HEX DRIVER IMPACT SOCKET 1/2″ SQ. DR.

Kennedy Chrome Molybdenum Impact Sockets & Accessories: 1/4″ Drive Reducers & Adaptors

Hexagon sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18 and 19mm.
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
15mm HSS L/S SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric

Long Series Type B230T
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
15mm HSS L/S SC/SH END MILL

Sherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric

Long Series E430T
Used for profile milling and producing open slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.

Read more
15mm HSS L/S SC/SH SLOT DRILL

Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

*Based on BS122: Part 4: 1980 though specific diameter is not included.

Read more
15mm HSS SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
15mm HSS SC/SH END MILL

Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

Read more
15mm HSS SC/SH SLOT DRILL

Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
15mm HSS-COBALT L/S SC/SH SLOT DRILL

Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%, Long – Metric

Long Series Type S231T – Metric
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more