Archives: Products
Showing 4721–4736 of 23773 results
-
150mm RIGID RUSTLESS RULE ROUND ENDRead moreKennedy Engineer’s Steel Rules: Round End – Rigid Blade
Round End – Rigid Blade
Spring tempered rigid steel blades. 150mm/6â = 19mm blade width. Other lengths = 25mm blade width. With hanging hole.Finest quality spring tempered stainless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. Accuracy: ± 0.2mm full scale. Constant at 20°C. Rustless.
Rigid Blade – Metric – subdivided to 0.5mm and 1mm, figured every 10mm.
Rigid Blade – Inch – subdivided to 1/16â, 1/32â and 1/64â, figured every inch. -
150mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
150mm ROLLING HEAD PRY BARAdd to cartKennedy Heavy Duty Pry Bars – Rolling Head
Rolling Head
Suitable for use in confined spaces. Manufactured from forged carbon heat treated steel with ground points. These traditional designs are ideal for use by tradesman in any industrial environment. -
150mm ROUND WIRE NAILS (1KG)Read moreRound Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
150mm ROUND WIRE NAILS (2KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
150mm ROUND WIRE NAILS (500gm)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
150mm ROUND WIRE NAILS (5KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
150mm SAFETY HASP & STAPLE BLACKRead moreSafety Hasps & Staples
Secure fixings are concealed by hasp when in locked position.
-
150mm SAFETY HASP & STAPLE BZP-ELECTRO GALVRead moreSafety Hasps & Staples
Secure fixings are concealed by hasp when in locked position.
-
150mm SHORT PATTERN HEAVY HASP AND STAPLE BLACKRead moreSafety Hasps & Staples
Secure fixings are concealed by hasp when in locked position.
-
150mm SHORT PATTERN HEAVY HASP AND STAPLE GALV’Read moreSafety Hasps & Staples
Secure fixings are concealed by hasp when in locked position.
-
150mm SMALL THROW OVER LOOP FOR 3″ GATES GALV.Read moreThrow-over Gate Loops
To suit 75mm (3″) gate post. Galvanised finish. Supplied individually, boxed in 10’s.
-
150mm SPARK RESISTANT ADJUSTABLE WRENCH Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Adjustable Wrenches
Adjustable Wrenches
Smooth jaw adjustment with self-locking design which prevents the jaws opening unintentionally under load.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
150mm SPRING ACTION CLAMPS (SET-4)Read moreKennedy Spring Action Gripper Clamps
The spring-loaded action is designed for speed and convenience, these multiple use clamps are used for holding a workpiece steady, or providing a âthird handâ. One hand operation gripping most materials, from wood to metal without damaging the surface. Durable non marking jaws pivot to hold irregular shaped workpieces and adjust instantly to any angle and shape to be clamped. Tough, durable and lightweight design. Contoured handle for non-slip grip with serrated jaws for extra firm holding.
-
150mm STANDARD DRILL PRESS VICEAdd to cartDrill Press Vices
Available in four different jaw widths. For drilling, light milling, vertical and horizontal work.One grooved and one plain replaceable jaw for square and hexagonal shapes across flats or corners, thin strips and discs. Jaws and lead screw are hardened and ground.
-
150mm TOWER BOLT GALVANISEDRead moreTower Bolts
General-purpose bolts often used on shed doors.
(MTL949 7825K)
* 150mm Necked Enclosed Tower Bolt