Archives: Products
Showing 4369–4384 of 23773 results
-
140mm DIA. (5.1/2″) BI-METAL V/P HOLESAWRp648.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
140mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
140mm/5.1/2″ ESD NEEDLE BENT NOSE PLIERSRead morePro-Torq Miniature ESD Pliers & Cutters
Dissipative handles safely discharge any electrostatic energy, reducing possibility of damage to sensitive items. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.
-
140mm/5.1/2″ ESD NEEDLE NOSE PLIERSRead morePro-Torq Miniature ESD Pliers & Cutters
Dissipative handles safely discharge any electrostatic energy, reducing possibility of damage to sensitive items. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.
-
140mm/5.1/2″ H/D DIAGONAL CUTTING NIPPERSRead moreKennedy Heavy-Duty Diagonal Cutting Nippers
Heavy-duty handle with slip guard. Double polished head and joint. Induction hardened cutting edges.
-
140mm/5.1/2″ HEAVY DUTY SNIPE NOSE PLIERSRead moreKennedy Heavy Duty Snipe Nose Pliers with Cutter
Heavy-Duty Snipe Nose Pliers with Cutter
Chrome vanadium steel, heavy-duty handle with slip guard. Double polished head and joint with induction hardened cutting edges. Also with side cutter and serrated gripping and crimping jaws behind the head. -
140mm/5.1/2″ SNIPE NOSE PLIER WITH CUTTERRead moreKennedy Snipe Nose Pliers with Cutter
Chrome vanadium steel, with bonded vinyl coated handle. Double polished head and joint with induction hardened cutting edges. Also with side cutter and serrated gripping and crimping jaws behind the head.
-
141 P20/P30 BRAZED TOOLRp306.000Read moreKennedy Bar & Knee Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
1413 4.1/4×3.1/4″ SHADE 9 LENSRead moreLenses to Suit Helmets & Shields
To protect the user from UV rays and weld spatter. Standard UK size 4 1/4″ x 3 1/4″.
-
1416 4.1/4×3.1/4″ SHADE 12 LENSRead moreLenses to Suit Helmets & Shields
To protect the user from UV rays and weld spatter. Standard UK size 4 1/4″ x 3 1/4″.
-
1417 4.1/4×3.1/4″ SHADE 13 LENSRead moreLenses to Suit Helmets & Shields
To protect the user from UV rays and weld spatter. Standard UK size 4 1/4″ x 3 1/4″.
-
-
145mm BENT NOSE PRECISION TWEEZERSRead moreTweezers
For workshop and home use. Cross pattern types are self closing and open only under applied pressure. High quality finish supplied singly or as a six piece set.
-
145mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
145mm/5.3/4″ PRO-TORQ DIAG/CUTTER 1000V INSRead morePro-Torq Insulated Pliers: Diagonal Cutting Nippers
Insulated Diagonal Cutting Nippers
Especially suitable for production line environments where repetitive work is undertaken. Double polished head and joint with induction hardened cutting edges. -
145x19mm (5.3/4″x3/4″) RIVET CUTTERRead moreAir Tool Chisels with 0.401â Shank
For all brands of portable air chisels including CP, Desoutter, Kobe, Toku and YK.
