Archives: Products
Showing 4049–4064 of 23773 results
-
13.50mm HSS S/S STUB DRILLRp160.000Read moreSherwood HSS General Purpose Stub Drills – Metric Sizes
Series S100 – Metric
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
13.50mm HSS SP/FL PARALLEL HAND REAMERRead moreStraight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. -
13.50mm HSS T/S DRILLRp282.000Read moreHSS Taper Shank Drills, 1 Morse Taper – Metric
To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8.
Manufacturing Standard: DIN 345. -
13.50mm HSS T/S SP/FL MACHINE REAMERRp1.592.000Read moreTaper Shank Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.
Tolerances (to H7)
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016. -
13.50mm Q-COAT CARBIDE DRILL 3xDRead moreSolid Carbide Q-Coat Drill
For drilling into general steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal, and abrasive plastic, self-centering.
Point angle: 140°, tolerance of diameter: m7, tolerance of shank: h6. Manufactured to DIN 6537. -
13.50mm Q-COAT CARBIDE DRILL 5xDRead moreSolid Carbide Q-Coat Drill
For drilling into general steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal, and abrasive plastic, self-centering.
Point angle: 140°, tolerance of diameter: m7, tolerance of shank: h6. Manufactured to DIN 6537. -
13.5mmx2.5mm HSS PLAIN SHANK WOODRUFF CUTTERRead moreSherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
13.5mmx2.5mm HSS SC/SH WOODRUFF CUTTERRead moreSherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
13.5mmx3mm HSS PLAIN SHANK WOODRUFF CUTTERRp1.056.000Read more
Sherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
13.5mmx3mm HSS SC/SH WOODRUFF CUTTERRp458.000Read more
Sherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
13.5mmx4mm HSS PLAIN SHANK WOODRUFF CUTTERRead more
Sherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
13.5mmx4mm HSS SC/SH WOODRUFF CUTTERRead more
Sherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
13.60mm HSS S/S JOBBER DRILLRp213.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
13.60mm HSS T/S DRILLRead more
HSS Taper Shank Drills, 1 Morse Taper – Metric
To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8.
Manufacturing Standard: DIN 345. -
13.70mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
13.70mm HSS S/S JOBBER DRILLRp226.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.