Archives: Products
Showing 3633–3648 of 23773 results
-
125mm B/H SWIVEL CASTOR(ZINC)N/W & BRAKERead moreNylon Wheel with Plain Bore – Zinc Finish
Suitable for use on compact floors (cement, tiles, etc). Particularly recommended for the food processing industry. Not recommended for use where mineral or organic acids are present. Operating temperature range -10C to 60C.
-
125mm B/H SWIVEL CASTOR(ZINC)P/N WHEELRead moreRed Polyurethane Tyre, Nylon Centre Wheel with Plain Bore – Swivel Type with Bolt Hole, Zinc Finish
Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with “cushioned” tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 80C.
-
125mm BL/RUB TYRE PLASTIC PL/BORE CENTRERead moreBlack Rubber Tyre Plastic Bore Centre
Suitable for use on hard floors (cement, tiles, etc). Suitable for humid environments where medium harsh chemicals may be present. Not recommended on uneven our rough surfaces. Operating temperature range -30C to 300C.
-
125mm BLACK RUBBER TYRE STEEL CENTRERead moreBlack Rubber Wheel Only
For smooth running with heavier loads. Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with “cushioned” tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 60C.
-
125mm ENGINEERS VICERead moreEngineerâs Vice
Manufactured from the highest quality castings with precision cut screw mechanisms and precision machined jaws.
Suitable for workshop, automotive and engineering use. -
125mm EXTENSION BAR 1/2″SQ. DR.Read moreYamoto Standard Extensions, 1/2″ – Standard
Chrome finish.
-
125mm GREY RUBBER PLASTIC TYRE-PLN. BORERead moreGrey Rubber Wheel Only
Suitable for use on hard floors (cement, tiles, etc). Non marking rubber tyre. Quiet running with “cushioned” tyre Suitable for humid environments where medium harsh chemicals may be present. Not recommended for use with organic solvents, chlorinated substances, hydrocarbons or mineral oils. Operating temperature range -20C to 60C.
-
125mm HARD INSIDE LATHE CHUCK JAWSRead moreIndexa Lathe Chuck Jaws – Hard Jaws: Inside
Hard Jaws – Inside
For self-centring lathe chucks (IND-475) – Indexa 3200 and 3500. Chuck jaws supplied in sets of 3. -
125mm HOOK-N-LOOP-BACKEDSANDING DISCS PLAIN P120Read moreKennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
Kennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
-
125mm HOOK-N-LOOP-BACKEDSANDING DISCS PLAIN P40Read moreKennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
Kennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
-
125mm HOOK-N-LOOP-BACKEDSANDING DISCS PLAIN P60Read moreKennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
Kennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
-
125mm HOOK-N-LOOP-BACKEDSANDING DISCS PLAIN P80Read moreKennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
Kennedy Hook-n-Loop Backed Sanding Discs, 127mm – Plain
-
125mm HVY F/GATE BOTTOM BAND ONLY 19mmx3″ GALV.Read moreHeavy Field Gate Hinges – Bottom Bands Only
To fit a 75mm gate post and to suit a 19mm diameter pin. Galvanised finish.
-
125mm INSULATED EXTENSION BARRead moreInsulated Sockets & Accessories
All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 and IEC 900 standards. All 1/2â square drive.
Insulated Reversible Ratchet Handle.
125 & 250mm Insulated Extension Bars.
200mm Insulated T-Handle.
Insulated Single Hexagon Sockets. -
125mm MICROMETER SETTINGRODRead moreOxford Micrometer Setting Standards – Metric
Metric Sizes
For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block. Manufactured to BS 870. -
125mm POLY TYRE/NYLON CENTRE WHEEL PL/BRRead moreRed Polyurethane Wheel Only
Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with “cushioned” tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 80C.