Archives: Products
Showing 3569–3584 of 23773 results
-
12″x1/2″ DRAIN TEST BUNGRead moreKennedy Drain Test Bung
Used to pressure test or temporarily seal the end of an open pipe which is newly laid or decommissioned, preventing the ingress of water, gasses, rodents.
-
12″x1/2″x14TPI BI-METAL HACKSAW BLADESRp22.000Read moreFlexible Back Bi-metal Hacksaw Blades
The perfect combination of shatter resistant spring steel, used as the backing material, and tough, wear-resistant HSS teeth – Electron-beam welded together. Ideal for interrupted cuts in cramped places or where the blade is subject to stress caused by twisting or bending. Provides optimum tooth strength/life and reduced breakage and fracture when compared to traditional all-hard blades. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x14TPI HSS ALL HARD HACKSAW BLADESRp25.000Read moreHSS All Hard Hacksaw Blades
Fully hardened for extra long tooth life and maximum straightness of cut. For use where workpiece is held securely in place. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x18TPI BI-METAL HACKSAW BLADESRp24.000Add to cartFlexible Back Bi-metal Hacksaw Blades
The perfect combination of shatter resistant spring steel, used as the backing material, and tough, wear-resistant HSS teeth – Electron-beam welded together. Ideal for interrupted cuts in cramped places or where the blade is subject to stress caused by twisting or bending. Provides optimum tooth strength/life and reduced breakage and fracture when compared to traditional all-hard blades. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x18TPI HSS ALL HARD HACKSAW BLADESRp25.000Add to cartHSS All Hard Hacksaw Blades
Fully hardened for extra long tooth life and maximum straightness of cut. For use where workpiece is held securely in place. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x24TPI BI-METAL HACKSAW BLADESRp24.000Add to cartFlexible Back Bi-metal Hacksaw Blades
The perfect combination of shatter resistant spring steel, used as the backing material, and tough, wear-resistant HSS teeth – Electron-beam welded together. Ideal for interrupted cuts in cramped places or where the blade is subject to stress caused by twisting or bending. Provides optimum tooth strength/life and reduced breakage and fracture when compared to traditional all-hard blades. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x24TPI HSS ALL HARD HACKSAW BLADESRp25.000Add to cartHSS All Hard Hacksaw Blades
Fully hardened for extra long tooth life and maximum straightness of cut. For use where workpiece is held securely in place. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x32TPI BI-METAL HACKSAW BLADESRp24.000Add to cartFlexible Back Bi-metal Hacksaw Blades
The perfect combination of shatter resistant spring steel, used as the backing material, and tough, wear-resistant HSS teeth – Electron-beam welded together. Ideal for interrupted cuts in cramped places or where the blade is subject to stress caused by twisting or bending. Provides optimum tooth strength/life and reduced breakage and fracture when compared to traditional all-hard blades. Made to BS 1919 : Part 1: 1993.
-
12″x1/2″x32TPI HSS ALL HARD HACKSAW BLADESRp25.000Add to cartHSS All Hard Hacksaw Blades
Fully hardened for extra long tooth life and maximum straightness of cut. For use where workpiece is held securely in place. Made to BS 1919 : Part 1: 1993.
-
12″x12″ PLASTERERS HAWKRead moreKennedy Plasterersâ Hawk
The Kennedy plasterers Hawk is manufactured from lightweight aluminium, the blade is scoured to prevent plaster slip-off. With a detachable wooden handle with a sponge rubber callous preventer to reduce discomfort during periods of extended use.
-
12″x18″ WOVEN POLYPROPYLENE BAGS (PK-100)Read moreAvon Woven Polypropylene Sacks
A material made by weaving polypropylene tapes in two directions to form a lightweight breathable fabric suitable for grains, seeds, minerals, sand and other products. Woven polypropylene bags offer the best packaging for a large
variety of products in industries such as agriculture, chemical, mining, building materials, and construction. Woven polypropylene bags offer economy, better protection, weight savings, and greater strength than other available packaging. Sold in packs of 100. -
12″x250Gx330M LAYFLAT TUBINGRead moreAvon? Layflat Polythene Tubing
Customise your polythene bag size! Choose your preferred width and use the layflat tubing to make your own custom sized bags or sleeves. Tubing can be heat sealed, tied or stapled closed. Available in Clear and Black. Larger sizes available on request.
-
12″x3/4″ SQ DR OFFSET HANDLERead moreKennedy Offset Fixed Handle, 3/4″
Knurled grip. Chrome vanadium. Fixed wrench for applications requiring rigid set up.
-
12″x3/8″ SPARK RESISTANT ENGINEERS S/DRIVER Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Screwdrivers – Flared
Flared
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark-resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential. -
12″x5/8″x18TPI HSS ALL HARD HACKSAW BLADESRp73.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
12/15/22mm MULTIBENDERRead moreKennedy Multi Bender Pipe Tool
Precision bending up to 180°. Bends tube without distortion. Formers and guides will accept 12, 15 and 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries. Spare formers and guides also available.