Archives: Products
Showing 3473–3488 of 23773 results
-
12.80mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
12.80mm HSS S/S JOBBER DRILLRp1.406.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
12.80mm HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills – Steam Tempered
General purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, web thickness: normal, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of f11. Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.
-
12.80mm HSS T/S DRILLRead moreHSS Taper Shank Drills, 1 Morse Taper – Metric
To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8.
Manufacturing Standard: DIN 345. -
12.90mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
12.90mm HSS S/S JOBBER DRILLRp1.440.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
12.90mm HSS S/S STUB DRILLRead moreSherwood HSS General Purpose Stub Drills – Metric Sizes
Series S100 – Metric
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
12″ (1/2LB) HICKORY HAMMER SHAFTRead moreHammer Shafts
Made from genuine hickory with a waxed finish. Manufactured to BS 3823.
-
12″ (300mm) FLAT BASTARD ENGINEERS FILERp103.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) FLAT SECOND ENGINEERS FILERp105.000Add to cartKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) FLAT SMOOTH ENGINEERS FILERp106.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HALF ROUND BASTARD ENGINEERS FILERp192.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HALF ROUND SECOND ENGINEERS FILERp163.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HALF ROUND SMOOTH ENGINEERS FILERp167.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HAND BASTARD ENGINEERS FILERp121.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HAND SECOND ENGINEERS FILERp105.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard