Archives: Products
Showing 3409–3424 of 23773 results
-
12.5mm 90DEG HSS-COBALT 3FL S/S COUNTERSINKRp321.000Add to cartHSS-Co 5% 3 Flute Countersinks – Straight Shank
90° Heavy Duty
Manufactured from HSS-E cobalt steel for deburring and chamfering
of most metals and plastics. Manufactured to BS328 : Part 5 : 1983. -
12.5mm 90DEG HSS-COBALT S/S COUNTERSINKRp356.000Read moreHSS-Co 5% 3 Flute Countersinks – Straight Shank
3 Flute – Straight Shank
Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 90°. -
12.5mm BENT TYPE LATHE CARRIERRead moreIndexa Industrial Lathe Carriers – Bent
Available with straight or bent tail. Manufactured from high grade, malleable Cast Iron with high tensile strength. Smooth action square head clamping screw.
-
12.5mm STRAIGHT TYPE LATHE CARRIERRead moreIndustrial Lathe Carriers – Straight
Available with straight or bent tail. Manufactured from high grade, malleable Cast Iron with high tensile strength. Smooth action square head clamping screw.
-
12.5×12.5mm P120 ALUMOXIDE SANDER BANDS (PK10)Read moreKobe Multi Tool Accessories – Sanding Bands
Suitable for use with Kobe, Dremel and Osaki Multi Tools.
Sanding Bands
Al-ox abrasive for shaping and smoothing wood and fibreglass and removing rust.
Quick change, use with holders shown below. Supplied in packs of 10. -
12.5×12.5mm P60 ALUMOXIDE SANDER BANDS (PK10)Read moreKobe Multi Tool Accessories – Sanding Bands
Suitable for use with Kobe, Dremel and Osaki Multi Tools.
Sanding Bands
Al-ox abrasive for shaping and smoothing wood and fibreglass and removing rust.
Quick change, use with holders shown below. Supplied in packs of 10. -
-
12.5×5.00mm CARBIDE CENTRE DRILLRp737.000Read moreCarbide Centre Drills – Metric
Metric Series
Used to produce 60° centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled.
60° included angle. 118° drill point. Manufactured to BS 328.Tolerances:
Cutting diameter +0.0005″
Shank diameter +0.0010″ -
12.5x6mm FELT LAPPING WHEELRead moreFelt Polishing Bobs
Suitable for use with Kobe, Dremel and Osaki Multi Tools
Felt Polishing Bobs
For use with polishing compounds to produce a high finish. Use with spindle shown below. -
12.60mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
12.60mm HSS S/S JOBBER DRILLRp1.362.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
12.60mm HSS S/S STUB DRILLRead moreSherwood HSS General Purpose Stub Drills – Metric Sizes
Series S100 – Metric
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
12.70mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
12.70mm FELT BOB BALL TYPE 3mm SHANKRead moreFelt Bobs
Ball Nose
York Felt Bobs are made of pure wool in a variety of sizes, shapes. The mandrels are exactly centred for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds. -
12.70mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
12.70mm HSS S/S JOBBER DRILLRp1.380.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
