Archives: Products
Showing 3329–3344 of 23773 results
-
12.0mm 3FL STANDARD CARBIDE SLOT DRILLRp992.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric
3 Flute: Regular Series – Metric
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 3FL STANDARD CARBIDE SLOT DRILLRp818.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 3 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
12.0mm 45DEG M/FLUTE HI-HELIX END MILL Q-COATRead moreSwissTech Carbide Plain Shank End Mills High Helix
Centre cutting.
To Manufacturers standards.
Cutting diameter to e8.
Shank diameter to h6.
EHQ-6*PR Carbide Q-Coat.
*Number varies according to the number of flutes.Series 72 – Regular Length
-
12.0mm 4FL BALL NOSE CARBIDE END MILLRp1.480.000Read moreSherwood Solid Carbide Micrograin Plain Shank End Mills 4 Flute Ball Nosed
Regular Series
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
12.0mm 4FL BALL NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 4 Flute – Regular Series, Metric
Regular Series – 4 Flute – Metric
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 4FL DOUBLE END CARBIDE END MILLRead moreKennedy Solid Carbide Micrograin Plain Shank End Mills Double Ended, 4 Flute: Regular Series, Metric
Double Ended – Regular Series – Metric
4 Flute
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting. Manufactured to Ansi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 4FL L/S B/NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 4FL L/SERIES CARBIDE END MILLRp1.694.000Read moreKennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 4FL STANDARD CARBIDE END MILLRp1.168.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
12.0mm 4FL STANDARD CARBIDE END MILLRp1.417.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric
4 Flute: Regular Series – Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
For drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118°. Tolerance of diameter: h7. Tolerance of shank: h6.
Supply unit. All diameters – 1 pce. Manufacturing Standard: DIN 338, DIN338. -
12.0mm HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Metric – Standard Length
Metric – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
12.0mm LONG ARM HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches, Long Arm – Metric
Metric – Long Arm
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
12.0mm ST/SH 2FL B/N SLOT DRILL Q-COATRead moreCarbide Plain Shank Slot Drills Ball Nosed 2 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
SBQ-2PR Carbide Q-CoatSeries 78 – Regular Length SBQ-2PR Carbide Q-Coat.
-
12.0mm ST/SH 4FL BALL NOSE END MILL Q-COATRead moreCarbide Plain Shank End Mills Ball Nosed 4 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
EBQ-4PR Carbide Q-Coat.Series 80 Long Series
Dimensions to DIN 844.
Carbide Q-Coat -
12.0mm ST/SH FINE ROUGH END MILL Q-COATRead moreSwissTech Carbide Plain Shank Ripper Fine Pitch: Series 82, Regular Length – Carbide Q-Coat
Centre cutting.
To Manufacturers standards.
Cutting diameter to e8.
Shank diameter to h6.
RFQ-3*PR Carbide Q-Coat.
*Number varies according to the number of flutes.Series 82 – Regular Length
Dimensions to DIN 844.