Search Results for: bosch
Showing 17–32 of 35 results
-
JIGSAW BLADES (EQV. TO BOSCH T101B) PKT-5Read moreJigsaw Blades
HCS – Medium Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.âTâ Type Shank
âTâ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki. -
JIGSAW BLADES (EQV. TO BOSCH T101BR) PKT-5Read moreJigsaw Blades
HCS – Medium Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.âTâ Type Shank
âTâ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki. -
JIGSAW BLADES (EQV. TO BOSCH T101D) PKT-5Read moreJigsaw Blades
HCS – Medium Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.âTâ Type Shank
âTâ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki. -
JIGSAW BLADES (EQV. TO BOSCH T111C) PKT-5Read moreJigsaw Blades
HCS – Medium Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.âTâ Type Shank
âTâ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki. -
JIGSAW BLADES (EQV. TO BOSCH T101A) PKT-5Read moreJigsaw Blades
HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki. -
NOID LIGHT SET 6-PCERead moreKennedy Noid Light 6 Piece Test Set
NLT060
The Kennedy® Noid light test set is for diagnosing fuel injector signal faults fast. Simply disconnect the injector harness and plug in the relevant noid light. Turn the ignition on – if the light is constant or absent, then the signal from the ignition system is at fault.
Easy to use and fits a wide variety of injector harnesses.
Compatible with: GM – TBI GM – SCPI. GM – PFI
FORD – TBI GEO – TBI BOSCH – PFI -
DIESEL INJECTOR SEAT CUTTER SET 8-PCERead moreDiesel Injector Seat Cutter Set – 8 piece
Specifically designed for the cleaning and recutting of injector seats. For use with Bosch, Delphi, Iveco, Fiat and other universal applications.
Includes: five cutting reamers, pilot post,
T-bar and a hexagon key. -
455x6mm (18″x1/4″) MOIL POINT CHISELRead morePower Tool Chisels
For Bosch: USH27, USH28, 11304, 11308, 12314
29mm Hex Shank with Single Flat -
380x3mm (15″x1/8″) MOIL POINT CHISELRead morePower Tool Chisels
Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm Hex Shank with Single Flat & Round Tang -
380x6mm (15″x1/4″) MOIL POINT CHISELRead morePower Tool Chisels
For Bosch: USH27, USH28, 11304, 11308, 12314
29mm Hex Shank with Single Flat -
380x6mm (15″x1/4″) MOIL POINT CHISELRead morePower Tool Chisels
For Bosch: USH10, 11305, 12312.
19mm Hex Shank with Single Flat -
305x50mm (12″x2″) WIDE CHISELRead morePower Tool Chisels
For Bosch: USH10, 11305, 12312.
19mm Hex Shank with Single Flat -
305x50mm (12″x2″) WIDE CHISELRead morePower Tool Chisels
Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm Hex Shank with Single Flat & Round Tang -
305x75mm (12″x3″) WIDE CHISELRead morePower Tool Chisels
Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm Hex Shank with Single Flat & Round Tang -
380x25mm (15″x1″) FLAT CHISELRead morePower Tool Chisels
For Bosch: USH10, 11305, 12312.
19mm Hex Shank with Single Flat -
380x31mm (15″x1.1/4″) FLAT CHISELRead morePower Tool Chisels
For Bosch: USH27, USH28, 11304, 11308, 12314
29mm Hex Shank with Single Flat