Archives: Products
Showing 2929–2944 of 23773 results
-
11.80mm HSS S/S BRIGHT JOBBER DRILLRp1.114.000Read moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
11.80mm HSS S/S JOBBER DRILLRp997.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
11.80mm HSS S/S L/S DRILLRp252.000Read moreHSS Straight Shank Long Series Drills – Steam Tempered
General purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, web thickness: normal, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of f11. Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.
-
11.80mm HSS T/S DRILLRead moreHSS Taper Shank Drills, 1 Morse Taper – Metric
To drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8.
Manufacturing Standard: DIN 345. -
11.90mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
11.90mm HSS S/S BRIGHT JOBBER DRILLRead moreSherwood HSS Jobber Drills Metric, Bright Finish – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
11.90mm HSS S/S JOBBER DRILLRp1.007.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
11″ (1/4LB) HICKORY HAMMER SHAFTRead moreHammer Shafts
Made from genuine hickory with a waxed finish. Manufactured to BS 3823.
-
11″ BROAD HEEL BRICK TROWELRead moreSenator Builderâs Trowels: Broad Heel Brick Trowel
Broad Heel Brick Trowel
11â heel width. London pattern, a smooth rounded end wooden handle with integral tang.Ground polished, hardened and tempered high carbon steel alloy blades, tapered to remain rigid right to the tip with high angle handles for improved knuckle clearance and control. Chromed ferrules hold the forged tang firmly.
-
11″ L/H CRANKED HANDLED SNIPSRead moreKennedy Cranked Blade Heavy-Duty Snips – Left Hand
The cranked design allows for extra leverage to be safely applied. Ideal for the more demanding cutting application. PVC dipped handle.
Left Hand
Designed to cut straight or to the left leaving waste material to the right of the blade. -
11″ R/H CRANKED HANDLED SNIPSRead moreKennedy Cranked Blade Heavy-Duty Snips – Right Hand
The cranked design allows for extra leverage to be safely applied. Ideal for the more demanding cutting application. PVC dipped handle.
Right Hand
Designed to cut straight or to the right, leaving waste material to the left of the blade. -
11″/280mm VERNIER CALIPERRead moreKennedy Fine Adjustment Vernier Calipers
Metric & Inch Reading – Graduation: 0.02mm/0.001â
Incorporating Quadri feature – gives outside, inside, depth and step readings. Fine adjustment feature allows improved sensitivity of slider movement. 14° vernier face angle reduces parallax. Satin chrome finish with clear easy read graduations. -
11″/280mm VERNIER CALIPER FINE ADJUSTMENTRead moreOxford Fine Adjustment Vernier Calipers
Give four types of reading, inside, outside, depth and step. Dual reading scale (metric and inch) with 14° bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Manufactured from hardened stainless steel for rigidity with satin finish. Conforms to DIN 862.
-
11″x11″ (280mmx280mm) ALUMINIUM PLASTERERS HAWKRead moreSenator Plastererâs Hawk
With single screw fixing, zinc plated for corrosion protection.Heavy gauge sheet aluminium platform, highly polished, mirror finish. Suitable for DIY use.
-
11″x18″x18″ WHITE PEDAL BIN LINERSRead moreAvon? Swing Bin Liners
Avon? Swing Bin Liners are strong polythene bags supplied on a roll. Suitable for domestic and office use.
Capacity: 40 Litre
Dimensions: 15x24x30inch
Thickness: 10 Micron
Bags per roll: 50 -
11″x4.1/2″ ALUMINIUM SHANK BANANA TYPE TROWELAdd to cartKennedy Plastererâs Trowel
Aluminium shank single tang banana pattern. Six rivet construction âcross groundâ to prevent drag. For laying on and finishing plaster. Manufactured to the high standards expected by todayâs trade.