Archives: Products

Showing 2833–2848 of 23773 results

11-712 NYLON HAMMER PLASTIC HANDLE

Thorex Nylon Faced Hammers

Plastic Handle
Chrome plated head with two screw on nylon striking faces.

Read more
11-714 NYLON HAMMER PLASTIC HANDLE

Thorex Nylon Faced Hammers

Plastic Handle
Chrome plated head with two screw on nylon striking faces.

Read more
11-716 NYLON HAMMER PLASTIC HANDLE

Thorex Nylon Faced Hammers

Plastic Handle
Chrome plated head with two screw on nylon striking faces.

Read more
11-DRAWER EXTRA LARGE TOOL ROLLER CABINET

Kennedy Extra Large Roller Cabinets – 11 Drawer

11 Drawer Top Chest
Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castorâs, fitted with two brakes. Castorâs are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed.
Top compartment (W x D x H): 1020 x 390 x 100mm.
Drawer sizes (W x D x H):
5@ 580 x 415 x 50mm. 1@ 580 x 415 x 100mm.
4@ 270 x 415 x 50mm. 1@ 270 x 415 x 150mm.

Read more
11-DRAWER EXTRA LARGE TOP CHEST

Kennedy Extra Large Tool Chests

11 Drawer Top Chest
Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castorâs, fitted with two brakes. Castorâs are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed.
Top compartment (W x D x H): 1020 x 390 x 100mm.
Drawer sizes (W x D x H):
5@ 580 x 415 x 50mm. 1@ 580 x 415 x 100mm.
4@ 270 x 415 x 50mm. 1@ 270 x 415 x 150mm.

Read more
11-PCE ENGINEERS SCREWDRIVER SET

Kennedy Engineersâ & Electriciansâ Screwdriver Set – 11 Pieces

With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

Set Contents (mm):
Flared: 6.3 stubby, 6.3 x 100, 6.3 x 150, 6.3 x 150, 9.5 x 250.
Parallel: 3.2 x 100, 4.8 x 150.
PZ: No.1 stubby, No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150.

Read more
11-PCE PRECISION SCREWDRIVER & TOOL SET

Kennedy Jewellersâ & Watchmakersâ Tool Sets, Carbon Steel Blades – 11 Pieces

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

11-Piece Set (-9040K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-2, PHO and PH1
Fine point awl and tweezers.

11-Piece Set (-9050K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-4, PHO-3, PHO-2, PHO and PH1.

11-Piece Set (-9060K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-2, PHO and PH1.
Fine point, awl and magnet.

Read more
11-PCE PRECISION SCREWDRIVER & TOOL SET

Kennedy Jewellersâ & Watchmakersâ Tool Sets, Carbon Steel Blades – 11 Pieces

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

11-Piece Set (-9040K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-2, PHO and PH1
Fine point awl and tweezers.

11-Piece Set (-9050K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-4, PHO-3, PHO-2, PHO and PH1.

11-Piece Set (-9060K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-2, PHO and PH1.
Fine point, awl and magnet.

Read more
11-PCE PRECISION SCREWDRIVER & TOOL SET

Kennedy Jewellersâ & Watchmakersâ Tool Sets, Carbon Steel Blades – 11 Pieces

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

11-Piece Set (-9040K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-2, PHO and PH1
Fine point awl and tweezers.

11-Piece Set (-9050K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-4, PHO-3, PHO-2, PHO and PH1.

11-Piece Set (-9060K)
Contents:
Parallel: 1.0, 1.2, 1.4, 1.8, 2.4 and 3.0mm.
Crosspoint: PHO-2, PHO and PH1.
Fine point, awl and magnet.

Read more
11.0 SCR SHORT 2FL SLOT DRILL-8% CO

SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated

Series 28 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
11.0 WELDON SHORT 2FL SLOT DRILL-8% CO
Rp465.000

SwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – Uncoated

Series 01 – Short Series
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
11.0 x 160mm SDS-PLUS HAMMER DRILL BIT
Rp70.000

SDS-Style Fitting Hammer Drill Bits

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.

Read more
11.0 x 300mm SDS-PLUS HAMMER DRILL BIT
Rp123.000

SDS-Style Fitting Hammer Drill Bits

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.

Read more
11.0-10.0 ER20 SINGLE ANGLE COLLET

ER – Single Angle Collets

Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499.

Read more
11.0-10.0 ER25 SINGLE ANGLE COLLET

ER – Single Angle Collets

Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499.

Read more
11.0-10.0 ER32 SINGLE ANGLE COLLET

ER – Single Angle Collets

Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499.

Read more