Archives: Products
Showing 2657–2672 of 23773 results
-
10mmx19mm ROUND TREE C/B BURR CUT 9Read moreYork Carbide Burrs – Round Tree
Round Tree
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10mmx25M CHAIN PACK RED & WHITERead morePost & Chain Barriers
The Matlock support post and chain demarcation barrier system is lightweight and sturdy. It is ideal to cordon off an area or to form a channel for queuing. Suitable for warehouses, factories, offices, leisure venues etc. Support posts, bases and chain packs sold separately.
Chain Support Post with Cap
Height: 910mm. Diameter: 50mm.Chain Support Post Bases
25m Chains
-
10mmx25M CHAIN PACK YELLOW & BLACKRead morePost & Chain Barriers
The Matlock support post and chain demarcation barrier system is lightweight and sturdy. It is ideal to cordon off an area or to form a channel for queuing. Suitable for warehouses, factories, offices, leisure venues etc. Support posts, bases and chain packs sold separately.
Chain Support Post with Cap
Height: 910mm. Diameter: 50mm.Chain Support Post Bases
25m Chains
-
10mmx3.15mmx120mm HSS E/L CENTRE DRILLRp628.000Read moreHSS Extra Length Centre Drills – Metric
Metric Series
Ground flute, for drilling centre holes on components prior to machining. Extra length drills particularly useful for drilling centre holes in recesses. Manufactured to BS 328 : Part 1 : 1986, DIN333A : ISO 86, ISO2540, ISO2541. -
10mmx30mm HEXAGON BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
10mmx30mm SPLINE BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Spline
Spline
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
10mmx55mm HEX BIT SOCKET1/2″ SQ. DR.Read moreYamoto Screwdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2â square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
10mmx72mm O/A HSS-COBALT 4FL PL/SH END MILLRp332.000Read moreHSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric
Regular Length
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
10mmx75mm HEXAGON BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
10mmx75mm SPLINE BIT 10mm DRIVERead moreKennedy Screwdriver Bits: 10mm Hex Drive Bits – Spline
Spline
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
10mmx95mm O/A HSS-COBALT4FL PL/SH END MILLRp484.000Read moreSherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
10oz CROSS PEIN HAMMER WOOD SHAFTRead moreCross Pein Hammers
Cross pein hammers are traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to âdriving homeâ with the flat faced pein.
Warrington Hardwood Shaft
Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face. -
10oz PLUMB BOBRead moreKennedy Plumb Bobs
Corrosive resistant epoxy coated with brass screwcap. For establishing vertical datum line
without the use of a level. -
10PC 10-24mm O/E CROWFOOT SET 3/8″ S/DRead moreKennedy Crowfoot Wrenches, 3/8″ – Metric Set
Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc. For use with 3/8â square drive tools
Set
10 Piece Metric: 10, 11, 12, 13, 14, 15, 17, 19, 22 and 24mm.
Supplied on a sliding socket rail for storage. -
10W/40 SEMI SYNTHETIC ENGINE OIL 5LTRRead moreSolent® Lubricants FS2005 Supergrade FS2⢠Engine Oil – Semi Synthetic 10W/40
Solent® Lubricants Supergrade FS2⢠is a high performance, semi synthetic, multi-temperature engine oil for all engines including multi valve, fuel injected and turbo charged, it will provide greater protection against engine wear than non-synthetic oil even at motorway speeds.
-
10X HAND MAGNIFIER LOUPERead moreKennedy Eye Loupes
Manufactured from shock resistant plastic. Shatterproof lens. Ideal for jewellers, watchmakers, electronics and model makers.