Archives: Products
Showing 17233–17248 of 23773 results
-
FOLDOVER RED CLIPBOARDRead moreOffis Clipboards
Offis stationery products cover everything you need in the office from paper, pencils, pens & rulers through to tape dispensers and staplers.
-
FOS003mk 3″ ORBITAL SANDERAdd to cartKobe⢠Mini Random Orbital Sander Kit
FO5003mk
Uses 2â and 3â backing pads. Rubber handle provides grip and operator comfort.
Two finger throttle for easier control and less fatigue. Adjustable power regulator to match the speed to the job. Ball bearing construction for a long tool life.
Accessories included:
2â and 3â backing pads. 10x 2â diameter sanding discs – 320, 400 and 600 grit.
10x 3â diameter sanding discs – 320, 400 and 600 grit. Spindle key and instructions.
Supplied in a robust blow-moulded carry case.
Free speed: 15,000rpm.
Air inlet thread: 1/4â NPT.
Minimum air hose size (ID): 3/8â (10mm).
Air consumption: 4cfm*.
Vibration level: 0.9 m/s2.*Based on a 15 second cycle per minute average use.
-
FOS890 JITTERBUG SHEET SANDERRead moreKobe⢠1/3 Sheet Heavy-Duty Orbital Sander
FOS890
For use on wood, metal, plastics, fibre glass, fillers etc. Connects to 10mm hose, dust extraction, adjustable speed regulator, low noise, vibration damped.Pad size: 165 x 90mm.
Sheet size: 93 x 230mm.
Air inlet thread: 1/4â NPT.
Minimum air hose size (ID): 3/8â (10mm).
Air pressure: 6.3bar/90psi.
Air consumption: 4cfm* (144ltr/min).
Noise Level: 91dBA
Sound Power: 105dBA
Vibration: 16.6m/s
Overall length: 175mm*Based on a 15 second cycle per minute average use.
-
FOUR EDGE DECORATORS SCRAPER BI-MATERIAL GRIPRead moreDecorator’s Scrapers
For scraping paint and varnish off wood. High carbon steel double edged blade. Convex edges to reduce surface damage. Bi-material comfort grip. Supplied with a two or four edge blade.
The replacement blades are one piece – two or four edged and be changed by unscrewing from the handle and rotating to a new edge.
-
FPS874 DUST FREE ORBITALSANDERRead moreKobe⢠Dust Free Orbital Palm Grip Sander
FPS874
Complete with 1M dust removal hose, large capacity dust collection bag and foam-backed hook-n-loop pad. Connects to dust extraction. Adjustable speed regulator.Specifications:
1/4″ NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
93 x 230mm sheet size.
Overall length: 175mm.
Pad Size: 165 x 90mm.*Based on a 15 second cycle per minute average use.
-
FR1-1 BI-DIRECTIONAL FLOW REGULATOR G1/8Read moreKennedy Push-Fit Pneumatic Fittings – Bi-directional Flow Regulators
Bi-directional Flow Regulators
Pressure range: +1 to +10 bar.
Temperature range: 0 to +80°C. -
FR1-2 BI-DIRECTIONAL FLOW REGULATOR G1/4Read moreKennedy Push-Fit Pneumatic Fittings – Bi-directional Flow Regulators
Bi-directional Flow Regulators
Pressure range: +1 to +10 bar.
Temperature range: 0 to +80°C. -
FR1-3 BI-DIRECTIONAL FLOW REGULATOR G3/8Read moreKennedy Push-Fit Pneumatic Fittings – Bi-directional Flow Regulators
Bi-directional Flow Regulators
Pressure range: +1 to +10 bar.
Temperature range: 0 to +80°C. -
FR2-4 UNI-DIRECTIONAL FLOW REGULATOR G1/2Read moreKennedy Push-Fit Pneumatic Fittings – Uni-directional Flow Regulators
Uni-directional Flow Regulators
Pressure range: +1 to +10bar.
Temperature range: 0 to +80°C. -
FRENCH CHALK (BOX-50)Read moreFrench Chalk
Square Sticks – 10 x 100mm
For general layout marking in a wide variety of applications from marking tailor’s seams and weld marking on sheet materials in fabrication industries.Flat Sticks – 5 x 12 x 125mm
Flat sticks can be used with separate holder (CTL-885-7359D). -
FRONT WHEEL DRIVE AXLE NUT SOCKET SET 7-PCERead moreKennedy Chrome Molybdenum Hub Nut Impact Socket Set – 7 Pieces
Hub Nut Impact Socket Set – 7 Piece
These extra deep sockets are six point single hexagon with a black oxidised finish and conform to DIN 3129, Inch SAE and USA Federal Standard GGG-W-660A.
Impact resistant storage case.
Socket sizes: 29, 30, 32, 34, 35, 36 and 38mm. -
FSASP ANTI SEIZE PASTE 500gmRead moreFood Safe Anti-Seize Paste
Formulated for use on assemblies in difficult areas where fretting corrosion and corrosion induced by wet environments occur. It can also be used to lubricate slow moving slides and pivot pins. Resistant to hot, cold and salt water it can be used across a wide temperature range where the solid lubricate including PTFE gives excellent dry lubrication and forms a barrier between all surfaces. Non-toxic, it complies with FDA regulations and is H1 registered.
-
FSBT500 FOOD SAFE BELT TECH 500mlRead moreFood Safe Belt Dressing
This H1 registered product is designed to extend life of leather, rubber and synthetic belts. Cleanly applied from the 500ml aerosol, it improves grip and allows the belt to transmit full power without slipping even in wet and damp environments.
Size: 500ml aerosol -
FSCGD FOOD SAFE CLEAR GEAR G150 20LTRRead moreFood Safe Clear Gear Oil
These gear oils are made from synthetic base oils combined with selected additives to produce a high performance gear lubricant. With excellent corrosion protection, oxidation and thermal stability they extend gear life/operating duty and lower maintenance costs. H1 registered.
-
FSCGD FOOD SAFE CLEAR GEAR G220 20LTRRead moreFood Safe Clear Gear Oil
These gear oils are made from synthetic base oils combined with selected additives to produce a high performance gear lubricant. With excellent corrosion protection, oxidation and thermal stability they extend gear life/operating duty and lower maintenance costs. H1 registered.
-
FSCGD FOOD SAFE CLEAR GEAR G360 20LTRRead moreFood Safe Clear Gear Oil
These gear oils are made from synthetic base oils combined with selected additives to produce a high performance gear lubricant. With excellent corrosion protection, oxidation and thermal stability they extend gear life/operating duty and lower maintenance costs. H1 registered.