Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 16593–16608 of 23773 results

  • DCGT 070204-AL INSERT GRADE K10
    Rp227.000

    Indexable Turning Inserts – DCGT

    Grades:
    QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
    K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

    Chip Breaker: PF. Application: Finish.
    Chip Breaker: AL. Application: Med Cut (Alum).

    Read more
  • DCGT 11T302-AL INSERT GRADE K10
    Rp290.000

    Indexable Turning Inserts – DCGT

    Grades:
    QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
    K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

    Chip Breaker: PF. Application: Finish.
    Chip Breaker: AL. Application: Med Cut (Alum).

    Read more
  • DCGT 11T304-AL INSERT GRADE K10
    Rp292.000

    Indexable Turning Inserts – DCGT

    Grades:
    QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
    K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

    Chip Breaker: PF. Application: Finish.
    Chip Breaker: AL. Application: Med Cut (Alum).

    Read more
  • DCGT 11T304-PF INSERT GRADE QX530
    Rp342.000

    Indexable Turning Inserts – DCGT

    Grades:
    QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
    K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

    Chip Breaker: PF. Application: Finish.
    Chip Breaker: AL. Application: Med Cut (Alum).

    Read more
  • DCGT 11T308-AL INSERT GRADE K10
    Rp292.000

    Indexable Turning Inserts – DCGT

    Grades:
    QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
    K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

    Chip Breaker: PF. Application: Finish.
    Chip Breaker: AL. Application: Med Cut (Alum).

    Read more
  • DCMT 070204-PM INSERT GRADE QX520
    Rp196.000

    Indexable Turning Inserts – DCMT

    Grades:
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

    Chip Breaker: PM. Application: Med Cut.

    Read more
  • DCMT 11T304-PM INSERT GRADE QX5030
    Rp215.000

    Indexable Turning Inserts – DCMT

    Grades:
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

    Chip Breaker: PM. Application: Med Cut.

    Read more
  • DCMT 11T304-PM INSERT GRADE QX520
    Rp215.000

    Indexable Turning Inserts – DCMT

    Grades:
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

    Chip Breaker: PM. Application: Med Cut.

    Read more
  • DCMT 11T308-PM INSERT GRADE QX5020
    Rp252.000

    Indexable Turning Inserts – DCMT

    Grades:
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

    Chip Breaker: PM. Application: Med Cut.

    Read more
  • DCMT 11T308-PM INSERT GRADE QX5030
    Rp252.000

    Indexable Turning Inserts – DCMT

    Grades:
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
    QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

    Chip Breaker: PM. Application: Med Cut.

    Read more
  • DDH180 18V (2×1.5AH) LI-ION CORDLESS COMBI DRILL

    18V 2-Speed Cordless Combi Drill

    DDH180
    Lightweight and well-balanced with a soft grip design, this drill has a built in LED light, 13mm keyless chuck, hammer-drill/drill-driver mode selection collar and 20 stage torque adjustment collar.
    The variable speed with electric brake and reversible control switch gives it maximum versatility in driver mode.
    No load speed: 0 – 400/0 – 1400rpm.
    Max torque: 35Nm.
    Blows per minute: 21,000bpm.
    Drilling capacity: mild steel 13mm, softwood 28mm,
    concrete 13mm.
    Batteries: 2x 1.5Ah, 18V DC.

    Read more
  • DECORATORS PAINTING KIT 18-PCE

    18 Piece Decorators Painting Kit

    Contents:
    • 2 x 25mm industrial paint brush.
    • 13, 50, 75 and 100mm industrial paint brushes.
    • 240mm economy paint tray – plastic.
    • 230mm wide birdcage (jumbo) paint roller.
    • 230mm long pile polyester roller refill.
    • 230mm medium pile polyester roller refill.
    • 230mm wide foam paint roller refill.
    • Long pile radiator roller complete.
    • Long pile radiator roller refill.
    • Metal telescopic handle.
    • General purpose masking tape 19mm x 50m and 50mm x 50m.
    • 460mm canvas tool bag.
    • Dust sheet.

    Read more
  • DECORATORS PREPARATION KIT 25-PCE

    25 Piece Decorator’s Preparation Kit

    Contents:
    • 5x dust masks.
    • 5x sheets grade 0 glass paper and grade 2 glass paper.
    • 50mm half tang scraper.
    • 75mm half tang scraper.
    • 38mm chisel point half tang putty knife.
    • 200mm half tang combination shavehook.
    • Window scraper.
    • Sanding block – fine and medium.
    • 310ml cartridge of decorator’s acrylic caulk.
    • 310ml cartridge gun – plastic.
    • 460mm canvas tool bag.

    Read more
  • DECORATORS WALLPAPERING KIT 21-PCE

    21 Piece Decorators Wallpapering Kit

    Contents:
    • 2x 131/2ltr plastic buckets.
    • 200mm (8”) paper hanging brush.
    • 220mm plastic handle scissors.
    • 5m/16ft locking tape.
    • 8 segment blade retractable knife.
    • Pack of 10 replacement 8 segment blades.
    • Jumbo sponge.
    • 1m/39” rule.
    • Wallpaper seam roller.
    • Paste brush.
    • Paste table.

    Read more
  • DEEP CHISEL BLADES FOR CRAFT KNIFE (PKT-5)

    Kennedy Precision Blades – Deep Cross & Wood Chiselling

    Deep Cross & Wood Chiselling

    Read more
  • DEL 2020K16 THREADING TOOLHOLDER
    Rp2.592.000

    External

    Dual DER/L – External.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping