Archives: Products
Showing 16465–16480 of 23773 results
-
COMBINATION EDGE/CENTRE FINDER 12mm BODYRead moreEdge & Centre Finders – Combination
Cylinder Type
For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines. -
COMBINATION LONG ARM B/PT MM/AF HEX KEY SET 20-PCERead moreKennedy Extra Long Ball Driver Hex Key Set
Can be used at angles of up to 30°. Manufactured from high grade carbon steel to international standards.
Metric – to ISO 2936: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 10mm
Inch – to DIN 911: 1/16â, 5/64â, 3/32â, 1/8â, 5/32â, 3/16â, 7/32â, 1/4â, 5/16â, 3/8â -
COMBINATION SHORT ARM MM/AF HEX KEY SET (20-PCE)Read moreKennedy Metric/Inch Hexagon Key Set – 20 Piece
Manufactured from high grade carbon steel to international standards ISO 2936 & DIN 911.
Supplied in a tough ABS plastic case for easy storage and selection.
Metric – 10 Piece Set Contents: 1.5, 2, 2.5, 3, 4 , 5, 6, 7, 8 and 10mm.
Inch – 10 Piece Set Contents: 1/16â, 5/64â, 3/32â, 1/8â, 5/32â, 3/16â, 7/32â, 1/4â, 5/16â and 3/8â. -
COMBINED PULLER SET (18-PCE)Read moreKennedy Mechanical Puller Sets
SWP9 Steering Wheel
Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.
Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16″ x 24 UNF). 2x 75mm screws (3/8″ x 16 UNC). 2x 90mm screws (5/16″ x 18 UNC). 1x plastic storage tray.HPB9 Harmonic Balance
For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″). Ductile steel yoke.
Contents: 1x yoke. 1x thrust bolt. 1x ram nut. 3x 75mm screws (3/8″ x 24 UNF).
3x 75mm screws (3/8″ x 16 UNC). 1x plastic storage tray.CP18 Combination
Steering wheel puller suitable for GM, Ford and Chrysler vehicles. For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″).
Contents: As SWP9 and HPB9 above. -
COMMERCIAL DUTY CIRCUIT TESTER 6/24VRead moreKennedy Commercial Duty Circuit Tester
Suitable for use with power on. For 6, 12 and 24V automotive systems only. Locates shorts, earths and open circuits. 1.4m heavy duty lead with spring strain relief. Super sharp stainless steel probe to test through wire insulation. Probe length: 100mm.
-
COMPACT FLARING TOOL WITH CUTTER/DEBURRER (SET)Read moreKennedy Folding Double Flaring Tool Set
Suitable for use on copper pipe. Compact folding design. Robust moulded case.
Single 45° flares: 3/16â to 5/8â. Double flares: 3/16â to 1/2â.
Cutter: 1/8â to 1 1/4â. Deburrer: 1/8â to 11/8â internal and external. -
COMPACT PUSH BUTTON 4 MAG STANDRead moreOxford Compact 4 Mag Stand
With four magnetic faces, one at 45°. Standard clamp.
Mounts: 1/4″ I/D lug, stem/spigot diameter: 5/16″.
Base dimensions: 48 x 44 x 51mm.
Column height x dia.: 185 x 12mm.
Crossbar length x dia.: 165 x 6.3mm.
Clamp ring: 6.35mm.
Magnetic pull: 30kg. -
COMPLETE AIR DRAIN TEST KITRead moreKennedy Air Drain Test Kit
Used for testing for leaks in pipes of up to 4â water gauge.
Contents: 4â âUâ gauge, 9â length of tubing, hand bellows, âYâ piece, 1/2â and 1â test nipple cap. -
COMPOSITE ALUMINIUM TOOLCASE 446x340x190mmRead moreKennedy Heavy-Duty Aluminium Tool Case
Manufactured from composite aluminium and rubber resin which is normally used in the automotive industry. Chromed steel hinges with lid support mechanism, two chromed steel locks with keys, a heavy duty plastic handle and four rubber feet. Inside are two secured hinged tool boards, each with 31 elasticated tool loops, an expandable document compartment, two small organisers and a customisable storage compartment with repositional dividers.
-
COMPOSITE HOSE PINCH CLAMP SETRead moreKennedy Hose Pinch Clamp Set
HPS003
These professional tools are for clamping flexible hoses from 11mm to 60mm in diameter. Made from a composite of glass reinforced nylon, they are lightweight, tough and have smooth rounded jaws to prevent damage to internal reinforcement. -
COMPRESSION & EXPANSION SPRINGS KITRead moreKennedy Fastener Assortments: Compression & Expansion Springs
Compression & Expansion Springs
Contents:
Expansion Springs:
Wire diameter 0.70mm, Outside diameter 6.29mm, Overall Length 31.5mm.
Wire diameter 0.50mm, Outside diameter 4.70mm, Overall Length 40mm.
Wire diameter 0.60mm, Outside diameter 6.29mm, Overall Length 51.5mm.
Wire diameter 0.60mm, Outside diameter 6.29mm, Overall Length 64.5mm.
Wire diameter 0.60mm, Outside diameter 4.70mm, Overall Length 58mm.
Wire diameter 0.80mm, Outside diameter 9.80mm, Overall Length 70mm.
Compression Springs:
Wire diameter 0.70mm, Outside diameter 8.90mm, Overall Length 50.0mm
Wire diameter 0.50mm, Outside diameter 6.00mm, Overall Length 25.0mm
Wire diameter 1.00mm, Outside diameter 8.90mm, Overall Length 50.0mm
Wire diameter 1.00mm, Outside diameter 8.90mm, Overall Length 25.0mm
Wire diameter 0.50mm, Outside diameter 6.00mm, Overall Length 50.0mm
Wire diameter 1.00mm, Outside diameter 7.40mm, Overall Length 50.0mm -
COMPUTER TECHNICIANS TOOLKIT 49-PCERead moreKennedy Computer Technicianâs Tool Kit
The kit is supplied in a Kennedy® professional tool and lap top bag.
Contents:
⢠Hexagon wrench set 1.5 to 6mm.
⢠Precision nut driver set 3.0, 3.5, 4.0, 4.5 and 5.0mm.
⢠Flat blade precision tweezers 170mm.
⢠Sharp nose precision tweezers 115mm.
⢠3 in 1 multimeter. ⢠Micro diagonal nipper 110mm.
⢠Automatic wire stripper 0.2 to 6mm capacity.
⢠Pro-Torq⢠screwdrivers: crosspoint No.0, No.1 stubby, No.2. slotted; parallel 3 x 100mm, 5 x 75mm, 5 x 100mm, 5 x 150mm.
⢠Crimping tool, capacity 8P8C/RJ-45, 6P/RJ-12, RJ-11 and 6P2C.
⢠Cable ties, black, 2.5 x 160mm packet of 100.
⢠Precision screwdriver set (in zip case): parallel 1.4 x 40mm, 2.0mm x 40mm, 2.4mm x 75mm 3.0mm x 75mm and 4.0mm x 100mm blade length; crosspoint PH0-3 x 40mm, PH0-2 x 75mm, PH-0 x 75mm and PH1 x 100mm blade length.
⢠ESD long nose pliers 130mm. ⢠ESD bent nose pliers 140mm.
⢠ESD flat nose pliers 130mm. ⢠Edison⢠aluminium torch.
⢠Black PVC insulation tape 19mm x 33m. ⢠Air duster 400ml.
⢠Absorbent wipes (pack of 50).
⢠Screen wipes (pack of 50).
⢠1x pair Polyco® pure dex antistatic gloves.
⢠Non-contact AC voltage detector.
⢠Retractable blade knife.
⢠Brushes: No.6 and No.10 flat fitch. -
CONCEALED CHAIN CLOSER BRASSRead moreDoor Furniture
Concealed spring type closer. Spring tension closing force Adjustable. Certified to BS 476 Pt. 22:1987. 1/2 hour fire rated. Left or right hand fitting. Suitable for use on doors up to 50kg. Available in brass or chrome finish.
-
CONCEALED CHAIN CLOSER CHROMERead moreDoor Furniture
Concealed spring type closer. Spring tension closing force Adjustable. Certified to BS 476 Pt. 22:1987. 1/2 hour fire rated. Left or right hand fitting. Suitable for use on doors up to 50kg. Available in brass or chrome finish.
-
CONCENTRATE LEMON WASHING-UP LIQUID 1LTRRead moreLemon Quest Washing Up Liquid
Concentrated to last. For use as dishwashing liquid and general household cleaning.
-
CONDOR RED GOGGLES CLEARLENS ANTI-FOG/SCRATCH/GASRead moreSafety goggles
Suitable for foundry work. Medium energy impact protection at extreme environmental temperatures. Flame resistant lens, frame and headband. Anti-scratch coating for a longer lens life. Replaceable, clear and flexible 2mm thick polycarbonate lens. Anti-mist treatment on both sides of the lens. Can be fitted over most prescription glasses. Class 1 optical quality for distortion free continuous use. Resistance to molten metals and hot solids. Built-in brow and cheek protection. Soft anatomically shaped thermoplastic rubber frame adapts to all faces. Raised nose bridge for extra lens protection when placed face down. Large peripheral viewing area. Wide anallergenic elasticated headband. Replacement clear polycarbonate lens KEN-960-8120K.
WARNING: WHEN WORN OVER PRESCRIPTION GLASSES, THE IMPACT ENERGY MAY BE TRANSMITTED FROM THE GOGGLES TO THE PRESCRIPTION GLASSES.