Archives: Products
Showing 16369–16384 of 23773 results
-
CC251463 25x63mm M14 STEPPED CLAMPRead moreClamp Fixture Components: CC25 – Step Clamp
CC25 – Step Clamp
Material: Medium Carbon Steel.
Hardness: HRC 32 – 38.
Surface Finish: Black Oxide. -
CC2516100 38x100mm M16 STEPPED CLAMPRead moreClamp Fixture Components: CC25 – Step Clamp
CC25 – Step Clamp
Material: Medium Carbon Steel.
Hardness: HRC 32 – 38.
Surface Finish: Black Oxide. -
CC2516150 38x150mm M16 STEPPED CLAMPRead moreClamp Fixture Components: CC25 – Step Clamp
CC25 – Step Clamp
Material: Medium Carbon Steel.
Hardness: HRC 32 – 38.
Surface Finish: Black Oxide. -
CCA500 CHAIN & DRIVE SPRAY 500mlRead moreSiteSafe Chain & Drive Spray
CCA500
This product is a special blend of quality oils, greases and solvents, designed to lubricate and protect all types of cables and slow moving chains. It penetrates quickly into the centre of cables providing excellent protection to the core. It will not sling off, drip or dry out even in adverse conditions. It will also penetrate chain rollers and links enabling smoother working and reduce friction, wear and the possibility of seizure. -
CCA500 TRIKE FREE CONTACT CLEANER 500mlRead moreSiteSafe CCA500 Contact Cleaner Spray Trike Free
The SiteSafe CCA500 contact cleaner is suitable for cleaning and degreasing delicate components such as those used in electrical equipment.
It can be used on most surfaces and will not effect PCBs, delicate plastics or painted surfaces. Non-corrosive formulation makes it suitable for cleaning parts of computers, typewriters, video and recording equipment, delicate switchgear, televisions and signalling mechanisms, flushing away all unwanted residues.
It contains only solvents which are permitted under the Montreal Protocol.
-
CCG500 COLD ZINC GALVANISING SPRAY 500mlRead moreCold Galvanising Spray
CCG500
Fast drying corrosion protection. Matches colour of newly galvanised metal. Ideal for protecting welding joints in galvanised structures. Can be used as a top coat or primer. Compatible with most paint finishes. Contains no CFCs or lead. Fitted with directional spray button designed to assist application in outdoor locations with minimum over-spray. -
CCGT 060202-AL INSERT GRADE K10Rp229.000Read moreIndexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 060204-AL INSERT GRADE K10Rp256.000Read moreIndexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 060204-PF INSERT GRADE QX500Rp267.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 060204-PF INSERT GRADE QX520Rp267.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 09T302-AL INSERT GRADE K10Rp301.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 09T304-AL INSERT GRADE K10Rp262.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 09T304-PF INSERT GRADE QX500Rp322.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 09T304-PF INSERT GRADE QX520Rp322.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 09T308-AL INSERT GRADE K10Rp262.000Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum). -
CCGT 120402-AL INSERT GRADE K10Read moreYamaloy Indexable Turning Inserts – CCGT
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum).