Showing 17–21 of 21 results

• 

  GD2806L HIGH SPEED MINI DIE GRINDER

  Kobe™ High Speed Mini Die Grinder

  GD2806L
  For precision engineer’s mould making etc. Safety lever throttle, front exhaust, ultra compact and lightweight.

  Specifications:
  Free speed: 25,000rpm.
  Collet size: 6mm.
  Air inlet thread: 1/4” NPT.
  Air hose size (ID): 10mm.
  Air pressure: 90psi.
  Air consumption: 4cfm*.
  Noise level: 94dBA.
  Sound power level: 103dBA.
  Vibration: 5.0m/s.
  Overall length: 120mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  GDA2206L ANGLE DIE GRINDER

  Kobe™ 90° Angle Die Grinder

  GDA2206L
  Safety lever throttle, reverse exhaust, Ideal for polishing, grinding and buffing, suitable for use in confined areas.
  Free speed: 22,000rpm.
  Air inlet thread: 1/4” NPT.
  Minimum air hose size: 3/8” (10mm).
  Air pressure: 90psi/6.2bar.
  Air consumption: 4cfm*.
  Noise Level: 85dBA
  Sound Power: 99dBA
  Vibration: 7.0m/s
  Collet size: 6mm.
  Overall length: 160mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  GES2506L 6mm EXTENDED SPINDLE DIE GRINDER

  Kobe™ Extended Spindle Die Grinder

  GES2506L
  For extra reach in “hard to get at” areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle.

  Specifications:
  1/4″ NPT air inlet thread for 10mm air hose.
  90PSI air pressure.
  4CFM* air consumption.
  Overall length: 248mm.
  Collet size: 6mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  GM5603 MICRO AIR DIE GRINDER

  Kobe™ Micro Air Die Grinder

  GM5603
  For precision grinding etc. With hose and silencer, 1/4” NPT air inlet thread for 5mm air hose, 90psi air pressure, 7cfm* air consumption.

  Collet size: 3mm.
  Free speed: 26,000rpm.
  Noise level: 76dBA.
  Vibration level: <4.8m/s2.
  Overall length: 156mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  SURFACE CONDITION/FINISHING GRINDER KIT

  Kobe™ Surface Conditioning and Finishing Kit

  Multi-purpose kit containing: one of each of the following surface preparation discs – fine, medium & coarse. 2x abrasive disc grades – P36, P60, P80 & P120.
  1x 6mm diameter shank to fit the backing pad. One Kobe angle die grinder with 1/4″ NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption.
  Supplied in a sturdy plastic carry case.

  *Based on a 15 second cycle per minute average use.

  Add to cart