Category: Service

Service

Showing all 8 results

  • BASIC SERVICE TOOLKIT 56-PCE

    56 Piece Standard Service Tool Kit

    Suitable for use by service engineers, electricians and tradesmen. All Kennedy industrial quality tools carry a quality guarantee.
    Contents:
    • 430 x 340 x 160mm ABS plastic, aluminium reinforced, tool case.
    • 150mm chrome adjustable wrench.
    • 19mm x 33m black PVC insulation tape.
    • 150mm mains tester range 125/250V.
    • Soldering iron 25W/240V.
    • Desoldering gun.
    • 17g 1.0mm diameter 60/40 cored solder.
    • 115mm sharp nose precision tweezers.
    • 30mm diameter inspection mirror (handle extends up to 480mm).
    • 7.5m/25ft steel tape.
    • 13 segment-blade mini autolock retract knife.
    • Junior hacksaw frame and blade.
    • Magnetic pick up tool (extends to 550mm).
    • 160mm snipe nose pliers.
    • 160mm diagonal cutting nippers.
    • 160mm engineer’s combination pliers with side cutter.
    • 150mm insulation and wire stripping pliers.
    • 115mm precision nippers.
    • 115mm precision end cutting nippers.
    • Chrome vanadium blade screwdrivers: crosspoint No.0, 1 and 2pt; slotted 6mm; supadriv No.0, 1 and 2pt.
    • Offset screwdrivers: 5mm slot x No.1pt, 6mm slot x No.2pt.
    • Insulated screwdrivers: parallel 4 x 100mm 1000V VDU, slotted 2.5 x 85mm.
    • 20mm sash tool.
    • 11 piece screwdriver and tool set: parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm; crosspoint PHO-2, PHO and PH1; fine point awl and tweezers.
    • 9 piece hex key set 1.5 – 10mm.
    • Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.

    Read more
  • COMPUTER TECHNICIANS TOOLKIT 49-PCE

    Kennedy Computer Technician’s Tool Kit

    The kit is supplied in a Kennedy® professional tool and lap top bag.
    Contents:
    • Hexagon wrench set 1.5 to 6mm.
    • Precision nut driver set 3.0, 3.5, 4.0, 4.5 and 5.0mm.
    • Flat blade precision tweezers 170mm.
    • Sharp nose precision tweezers 115mm.
    • 3 in 1 multimeter. • Micro diagonal nipper 110mm.
    • Automatic wire stripper 0.2 to 6mm capacity.
    • Pro-Torq™ screwdrivers: crosspoint No.0, No.1 stubby, No.2. slotted; parallel 3 x 100mm, 5 x 75mm, 5 x 100mm, 5 x 150mm.
    • Crimping tool, capacity 8P8C/RJ-45, 6P/RJ-12, RJ-11 and 6P2C.
    • Cable ties, black, 2.5 x 160mm packet of 100.
    • Precision screwdriver set (in zip case): parallel 1.4 x 40mm, 2.0mm x 40mm, 2.4mm x 75mm 3.0mm x 75mm and 4.0mm x 100mm blade length; crosspoint PH0-3 x 40mm, PH0-2 x 75mm, PH-0 x 75mm and PH1 x 100mm blade length.
    • ESD long nose pliers 130mm. • ESD bent nose pliers 140mm.
    • ESD flat nose pliers 130mm. • Edison™ aluminium torch.
    • Black PVC insulation tape 19mm x 33m. • Air duster 400ml.
    • Absorbent wipes (pack of 50).
    • Screen wipes (pack of 50).
    • 1x pair Polyco® pure dex antistatic gloves.
    • Non-contact AC voltage detector.
    • Retractable blade knife.
    • Brushes: No.6 and No.10 flat fitch.

    Read more
  • CYCLE REPAIR KIT 15-PCE

    15 Piece Cycle Repair Kit

    This comprehensive kit is ideal for cycle repairs at home, comes in its own wallet and measures 90 x 200 x 40mm. Large than the multi-tools but still small enough to carry in a ruck sack or pannier for those touring holidays.
    Contents:
    • 2x ‘Y’ box wrenches: 8, 9, 10mm and 12, 13 and 14mm.
    • 150mm (6″) adjustable wrench 20mm max. opening.
    • Hook spanner with 15 and 16mm open ended cone wrench.
    • Screwdriver handle: crosspoint No.1 and No.2.
    • Slotted bits: 4 and 6mm.
    • 3x hex key wrenches: 4, 5, 6 and 8mm hex adaptor.
    • 1x forged steel ‘O’ spoke adjuster: 10, 11, 12, 13, 14 and 15 G.E. 3x tyre levers.

    Read more
  • ELECTRICIANS VDE TOOLKIT16-PCE

    16 Piece Electrician’s VDE Tool Bag & Kit

    Heavy duty tear-resistant tool bag with Hook-n-Loop fastening flap. Double webbed shoulder strap fixed with metal release clasps. Two removable tool boards inside which have a unique tool storage securing system built in. All tools are VDE approved.
    Contents:
    • Electrician’s tool bag (320 x 340 x 125mm).
    • 150mm euro tester will detect ‘live’ electricity supply. Suitable for AC to 125 – 250V, 3mm wide tip. Conform to VDE 0630 Part 4.
    • 145mm (53/4″) Pro-Torq grip diagonal nippers, 1000V insulated.
    • 160mm (63/8″) Pro-Torq snipe nose pliers, 1000V insulated.
    • 165mm (61/2″) Pro-Torq engineer’s combination pliers, 1000V insulated.
    • 170mm (63/4″) Pro-Torq wire strippers, 1000V insulated.
    • 7 piece VDE dual grip screwdriver set: No.0 x 60, No.1 x 80 and No.2 x 100mm, 2.5 x 75, 4.0 x 100, 5.5 x 125 and 6.5 x 150mm.
    • 180mm (7″) insulated cable knife, curved blade.
    • 2x small parts storage boxes.

    Read more
  • INSULATED SCREWDRIVER & PLIER SET 10-PCE

    1000V Dual Grip Screwdriver & Plier Set

    10 Piece Set
    Fully insulated professional high grip dual material handles that are VDE tested up to 1000V. Screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole. Pliers have chrome vanadium steel double polished head and joint heads.
    Contents:
    Screwdrivers:
    Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm.
    Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm.
    Pliers:
    • 6.3/8″ Pro-Torq snipe nose pliers,
    • 6.1/4″ Pro-Torq grip nipper pliers,
    • 6.1/2″ Pro-Torq engineering combination pliers.

    Read more
  • LIVE LINE VDE TOOLKIT 17-PCE

    17 Piece ‘Live Line’ VDE Tool Kit

    Contents:
    • Tear-resistant tool roll (600 x 300mm).
    • 190mm euro tester – will detect ‘live’ electricity supply. Suitable for AC to 125 – 250V. 3mm wide tip. Conform to VDE 0630 Part 4.
    • 145mm (61/4″) Pro-Torq grip diagonal nippers, 1000V insulated.
    • 160mm (63/8″) wire strippers.
    • Engineer’s combination pliers and snipe nose pliers, 1000V insulated.
    • 240mm (91/2″) water pump box joint pliers, 1000V insulated.
    • 200mm adjustable wrench 1000V insulated.
    • 7 piece insulated VDE screwdriver set: parallel: 2.5 x 85, 4.0 x 100, 5.5 x 125 and 6.5 x 150mm; crosspoint: No.0 x 75, No.1 x 100 and No.2 x 200mm.
    • 180mm (7″) insulated cable knife curved blade.
    • 210mm (81/4″) cable cutter.

    Read more
  • PROFESSIONAL DELUXE SERVICE TOOLKIT 122-PCE

    Kennedy ‘Deluxe’ Service Engineer’s Tool Kit – 122 Piece

    This superb kit contains all the necessary tools for the service engineer in a sturdy aluminium case partitioned to keep tools organised and readily accessible.

    Contents
    • Aluminium tool case.
    • Six piece 16cm needle file set.
    • 150mm adjustable wrench.
    • Digital multimeter.
    • 125/250V mains tester.
    • 19mm x 33m insulation tape: black, red and green/yellow PVC.
    • 25W soldering iron.
    • Cable stripping knife.
    • Desoldering gun.
    • 60/40 cored solder.
    • Butane soldering torch.
    • Centre punch 2.4 x 3.2mm.
    • 2x parallel pin punches.
    • 150mm/6” flexible rustless rule.
    • Machinists scriber.
    • Sharp nose tweezers.
    • Flat blade tweezers.
    • Eye loupe.
    • Telescopic inspection mirror.
    • Magnetic pick up tool (extends to 550mm).
    • 225g (1/2lb) ball pein hammer.
    • 3 1/2 oz cross pein hammer.
    • 7.5m/25ft steel tape.
    • Aluminium pocket torch.
    • Retractable knife.
    • Auto return utility knife.
    • Junior hacksaw and blade.
    • 10 junior hacksaw blades.
    • 150mm flat nose plier.
    • 150mm insulation and wire stripping plier.
    • 150mm wire crimper/stripper.
    • 160mm snipe nose plier.
    • 160mm diagonal cutting nipper.
    •160mm combination plier.
    • 4 piece circlip plier set.
    • 177mm locking plier.
    • 115mm precision flat nose plier.
    • 115mm precision long nose plier.
    • 115mm precision nippers.
    • 115mm precision end cutting plier.
    • 165mm soft touch pliers.
    • Pro-Torq grip screwdrivers with chrome vanadium blade: slotted 100 x 6mm; crosspoint 76mm x No.0 and No.1, 6mm x No.2; supadriv 76mm x No.0
    and 1, 4” x No.2; electrician’s parallel 150 and 200 x 5mm.
    • Offset screwdrivers: 5mm x No.1, 6mm x No. 2.
    • Insulated screwdrivers: parallel 4 x 100mm, 1000V VDU, slotted 5.5 x 125mm.
    • Torx screwdrivers: T6, T8 and T10.
    • 11 piece screwdriver and tool set.
    • Nine piece 5.5 – 13mm combination spanner set.
    • Seven piece electronic screwdriver set.
    • Six piece 0 – 11 BA open ended spanner set.
    • Multi-purpose snips.
    • Seven piece metric hexagon key set.
    • Multi-purpose oil.
    • 20mm sash tool.
    • 100 cable ties.
    • Scissors.

    Read more
  • PROFESSIONAL SERVICE TOOLKIT 102-PCE

    102 Piece Service Engineer’s Tool Kit

    Contents
    • Hi-impact mobile tool case.
    • Six piece 16cm cut 2 needle file set.
    • 150mm chrome finish adjustable wrench.
    • 150mm mains tester range 125/250V.
    • 19mm x 33m insulation tape: black, red and green/yellow pvc.
    • Soldering iron 25W 240V.
    • Desoldering gun.
    • Cable stripping knife.
    • 17g 1.0mm diameter 60/40 cored solder.
    • Square head centre punch 3.2 x 100mm.
    • 150mm/6″ flexible rustless rule.
    • Precision tweezers: 115mm sharp nose, 120mm flat blade. • Eye loupe.
    • 30mm dia. telescopic inspection mirror (handle expands to 480mm).
    • 225g (1/2lb) ball pein hammer.
    • 7.5m/25′ steel tape.
    • 13 segment blade mini autolock retractable knife.
    • Junior hacksaw frame c/w hardened blade.
    • 10 junior hacksaw blades for metal.
    • 215mm plastic handle scissors.
    • Magnetic pick up tool.
    • 160mm snipe nose pliers.
    • 160mm diagonal cutting nippers.
    • 160mm combination pliers with side cutter.
    • 150mm insulation and wire stripping pliers.
    • 115mm precision flat nose pliers.
    • 115mm precision long nose pliers.
    • 115mm precision nippers.
    • 115mm precision end cutting nippers.
    • Pro-Torq grip screwdrivers with chrome vanadium blade: slotted 100 x 6mm; crosspoint 76mm x No.0 and No.1, 6mm x No.2; supadriv 76mm x No.0 and No.1, 100mm x No.2; electricians’: parallel 150 and 200 x 5mm.
    • Offset screwdrivers: 5mm x No.1 and 6mm x No. 2.
    • 1000V VDU insulated screwdrivers: parallel 4 x 100mm; slotted 5.5 x 125mm.
    • Torx screwdrivers: T6, T8 and T10.
    • 11 piece screwdriver and tool set: parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm; crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
    • Seven piece electronic screwdriver set: parallel 1.4, 2, 2.4 and 3mm; crosspoint PHO-3, PHO-2 and PH0.
    • Six piece chrome vanadium steel 0 – 11 BA open ended spanner set.
    • 20mm diameter sash tool.
    • Nine piece hex key set 1.5 – 10mm.
    • Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop