Showing 1–16 of 18 results

• 

  BUILDERS CONSTRUCTION TOOLKIT (23-PCE)

  23 Piece Builder’s Construction Tool Kit

  • 9″ (225mm) hi-vis magnetic boat level.
  • 24″ (600mm) hi-vis girder section level.
  • 6″ London pattern pointing trowel.
  • 11″ board heel brick trowel.
  • 111/2″ x 41/2″ plasterer’s finishing trowel.
  • 11/2″ ball pein hammer with hickory shaft.
  • 16oz claw hammer with wooden shaft.
  • 3m/10ft hi-vis locking tape with yellow casing.
  • 30m/100ft fibre glass measuring tape.
  • 13 segment 9mm standard snap-off blade knife.
  • Retractable trimming knife.
  • 6″ diagonal cutting nippers.
  • 8″ linesman’s pliers.
  • Eight piece fluted handle screwdriver set.
  • 10″ straight blade tinsnips.
  • 24″ canvas tool bag.

  Read more
• 

  DECORATORS PAINTING KIT 18-PCE

  18 Piece Decorators Painting Kit

  Contents:
  • 2 x 25mm industrial paint brush.
  • 13, 50, 75 and 100mm industrial paint brushes.
  • 240mm economy paint tray – plastic.
  • 230mm wide birdcage (jumbo) paint roller.
  • 230mm long pile polyester roller refill.
  • 230mm medium pile polyester roller refill.
  • 230mm wide foam paint roller refill.
  • Long pile radiator roller complete.
  • Long pile radiator roller refill.
  • Metal telescopic handle.
  • General purpose masking tape 19mm x 50m and 50mm x 50m.
  • 460mm canvas tool bag.
  • Dust sheet.

  Read more
• 

  DECORATORS PREPARATION KIT 25-PCE

  25 Piece Decorator’s Preparation Kit

  Contents:
  • 5x dust masks.
  • 5x sheets grade 0 glass paper and grade 2 glass paper.
  • 50mm half tang scraper.
  • 75mm half tang scraper.
  • 38mm chisel point half tang putty knife.
  • 200mm half tang combination shavehook.
  • Window scraper.
  • Sanding block – fine and medium.
  • 310ml cartridge of decorator’s acrylic caulk.
  • 310ml cartridge gun – plastic.
  • 460mm canvas tool bag.

  Read more
• 

  DECORATORS WALLPAPERING KIT 21-PCE

  21 Piece Decorators Wallpapering Kit

  Contents:
  • 2x 131/2ltr plastic buckets.
  • 200mm (8”) paper hanging brush.
  • 220mm plastic handle scissors.
  • 5m/16ft locking tape.
  • 8 segment blade retractable knife.
  • Pack of 10 replacement 8 segment blades.
  • Jumbo sponge.
  • 1m/39” rule.
  • Wallpaper seam roller.
  • Paste brush.
  • Paste table.

  Read more
• 

  ENGINEERS APPRENTICES TOOLKIT 107-PCE

  Kennedy Apprentice Engineer’s Tool Kit – 107 Piece

  AET107
  Contents:
  • Toolbox.
  • Six piece Pro-Torq screwdriver set: crosspoint No.1 x 75 and No.2 x 100mm; flared 6.3 x 100 and 8.0 x 250mm; parallel 5 x 100 and 5 x 200mm.
  • Six piece precision screwdriver set: crosspoint PH0 and PH1; parallel 1.4, 2.0, 2.4, and 3.0mm.
  • 6 – 19mm 14 piece metric combination spanner set.
  • Nine piece metric hex key set: 1.5 – 10mm.
  • Eight piece 2nd cut file set: one each flat, hand, round, half round, 3 square and square.
  • 12 piece 2nd cut needle file set: 1 each hand, flat, knife, round, half round, square, 3 square, crossing, round edge joint, slitting, warding and barrette.
  • Two of each grade 0, 1 and 2 emery sheets.
  • 200mm/8” phosphate adjustable wrench.
  • 18 blade metric/inch feeler gauge.
  • Magnetic pick-up tool extends to 650mm.
  • 7.5m/25ft locking tape rule.
  • Snap-off blade knife.
  • Junior hacksaw.
  • 20 junior hacksaw blades.
  • 300mm (12”) hacksaw frame.
  • 6 hacksaw blades.
  • General purpose shears.
  • 3 piece professional plier set.
  • 255mm straight jaw grip wrench.
  • 6mm x 150mm flat cold chisel.
  • 1lb ball pein hammer.
  • 175mm engineer’s scriber.
  • 30mm diameter inspection mirror (extends to 650mm).
  • Centre punch.
  • 150mm (6”) engineer’s square.
  • 150mm (6”) pocket rule.
  • 100cc grease gun.
  • Eye loupe.

  Read more
• 

  ENGINEERS APPRENTICES TOOLKIT 208-PCE

  Kennedy Apprentice Engineer’s Tool Kit- AET200 – 208 Piece

  Supplied in a three drawer professional roller cabinet and a three drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.

  3 Drawer Top Chest
  Top compartment size: 89 x 661 x 150mm.
  Drawer sizes: 1@ 51 x 591 x 282.5mm. 2@ 102 x 591 x 282.5mm.

  3 Drawer Roller Cabinet
  Internal drawer dimensions
  Bottom compartment size: 610 x 432 x 356mm.
  Drawer sizes: 3@ 591 x 410 x 102mm.

  Contents:
  • 25 piece HSS drill set 1 – 13.00mm x 0.5mm.
  • Six piece 200mm double cut engineer’s file set.
  • Six piece 16cm cut 2 assorted needle file set.
  • 25 x 230 x 280mm assorted abrasive sheet.
  • 200mm chrome vanadium steel adjustable spanner.
  • 6 x 150mm flat cold chisel.
  • 19mm x 33m black pvc insulation tape.
  • 76mm, 18 blade combination feeler gauge set.
  • 4.8mm square head centre punch.
  • 150mm/6” stainless steel rule c/w pocket clip.
  • 178mm double ended engineer’s scriber.
  • Eye loupe.
  • Adjustable telescopic 30mm dia. inspection mirror (expands to 180mm).
  • Six piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
  • 150mm/6” engineer’s square – BS 939 grade B.
  • Tap wrenches 1.5 – 6.4mm and 6.4 – 19mm.
  • Magnetic telescopic pick-up tool extends to 550mm.
  • 29 piece engineer’s bit set.
  All 6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor.
  Hexagon: 2, 3, 4, 5, 6, 7 and 8mm; flat 3, 4, 5, 5.5, 6.5 and 8mm; 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 7/32” and 5/16”; crosspoint No.1, 2 and 3; Pozidriv® No.1, 2 and 3.
  • 450g (1lb) ball pein hammer wood shaft.
  • 7.5m/25ft steel tape.
  • Snap-off eight segment blade economy knife.
  • Retractable trimming knife with five blades.
  • Junior hacksaw frame.
  • 300mm lightweight professional hacksaw frame.
  • Six off 12” x 1/2” x 18tpi HSS hacksaw blades.
  • 20 junior hacksaw blades.
  • Two plastic handle household scissors.
  • 150mm snipe nose plier with side cutter.
  • 150mm diagonal cutting nipper.
  • 150mm engineer’s combination pliers with side cutter.
  • 250mm curved jaw high strength grip wrench.
  • Eight piece Pro-Torq screwdriver set: crosspoint No.1 x 75, No.2 x 100; pozidriv®
  No.2 x 100; flared 6.3 stubby, 6.3 x 100, 8.0 x 200; parallel 5.0 x 75, 5.0 x 150.
  • 14 piece combination spanner set: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
  • 25 piece metric socket set 1/2” square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
  Spark plug sockets: M10 and M14. Accessories: quick release ratchet handle,
  sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
  • Nine piece metric hex key set 1.5 – 10mm.

  Read more
• 

  ENGINEERS STARTER TOOLKIT (47-PCE)

  47 Piece Engineer’s Workshop Tool Kit

  • Six piece 16cm cut 2 assorted needle file set. • 10x 12 x 1/2″ x 18T all hard hacksaw blades.
  • 8″ (200mm) C/V adjustable spanner. • 6″ (150mm) stainless steel rule with pocket clip.
  • Metric and inch feeler gauge, blade length: 60mm.
  • 1lb ball pein hammer with hickory shaft.
  • 16oz black rubber mallet with wooden shaft.
  • 5m/16ft locking tape rule with chrome casing.
  • 8 segment 18mm heavy duty snap-off blade knife.
  • Retractable trimming knife.
  • 12″ DIY hacksaw.
  • 6″ heavy duty snipe nose pliers with side cutter.
  • 6″ diagonal cutting nippers.
  • 7″ linesman’s pliers.
  • 10″ multiple slip joint pliers.
  • 10″ straight blade tinsnips.
  • 10″ straight jaw high strength grip wrench.
  • 8 piece fluted handle screwdriver set.
  • 7 piece 6 – 19mm drop forged open-ended spanner set.
  • 21″ five tray cantilever toolbox.

  Read more
• 

  ENGINEERS WORKSHOP TOOLKIT (90-PCE)

  90 Piece Engineer’s Workshop Tool Kit

  Contents:
  • Top chest.
  • 24 piece 1/2″ drive metric socket set.
  • Six piece 16cm cut 2 assorted needle file set.
  • 10x 12″ x 1/2″x 18tpi all hard hacksaw blades.
  • 8″/200mm chrome vanadium adjustable spanner.
  • 12″ rule – walleted.
  • Metric/inch feeler gauge 60mm blade length.
  • 11/2lb ball pein hammer- hickory shaft.
  • 16oz black rubber mallet – wood shaft.
  • 5m/16ft locking tape rule – chromed case.
  • Eight segment 18mm heavy duty snap-off blade knife.
  • Retractable trimming knife.
  • DIY hacksaw.
  • 2x 50mm G-clamps.
  • 2x 100mm G-clamps.
  • 6″ snipe nose plier/side cutter.
  • 8″ straight blade tinsnip.
  • 6″ diagonal cutting nipper.
  • 7″ linesman’s pliers.
  • 10″ multiple slip joint pliers.
  • 10″ straight jaw high strength grip wrench.
  • 16 function 10-blade tool.
  • 15 piece duel grip screwdriver set.
  • 14 piece 6 – 19mm drop forged combination spanner set.

  Read more
• 

  HOME HANDYMAN TOOL KIT (33-PCE)

  33 Piece Home Handyman Kit

  HHK32
  Supplied in a robust Tuff-E tool box with a tote tray for carrying tools to the job and a multi-compartment storage box with lid.
  Contents:
  • 18 piece wood, metal and masonry drill set, 6x wood drills 3, 4, 5, 6, 8 and 10mm; 6x masonry drills 3, 4, 5, 6, 8 and 10mm; 6x HSS drills 3, 4, 5, 6, 8 and 10mm.
  • 8 piece fluted handle screwdriver set: flared: 6mm stubby, 3 x 100mm and 8 x 200mm; parallel: 3.2 x 75mm and 4 x 150mm; pozidriv: No.2 stubby, No.1 x 75mm and No.2 x 100mm.
  • Diagonal cutting nippers 150mm/6″.
  • Snipe nose pliers with side cutter 150mm/6″.
  • Linesman’s pliers 180mm/7″.
  • 8 segment snap-off blade knife with a contour moulded grip.
  • 3m/10ft locking tape rule in a tough plastic case.

  Read more
• 

  HOME HANDYMAN TOOL KIT (51-PCE)

  Senator Home Handyman Tool Kit – 51 Piece

  HHK51
  Supplied in a robust Tuff-E tool box, c/w double latch.
  Contents:
  • 8 piece fluted handle screwdriver set: flared 6mm stubby, 3 x 100mm and 8 x 200mm; parallel 3.2 x 75mm and 4 x 150mm; pozidriv No.2 stubby, No.1 x 75mm and No.2 x 100mm.
  • 10 piece screwdriver bit set: 6mm quick release hex bit adaptor; flat 3, 4, 5, 6 and 8mm; crosspoint No.0, 1, 2 and 3mm.
  • 200mm (8”) chrome vanadium adjustable spanner.
  • 225mm (9”) hi-vis magnetic boat level.
  • 600mm (24”) hi-vis girder section level.
  • 150mm mains tester, range 125/250V.
  • 19mm x 33m black PVC insulation tape.
  • Adjustable telescopic 300mm dia inspection mirror.
  • 450g (16oz) claw hammer wood shaft.
  • 3m/10ft hi-vis locking tape.
  • 13 seg 9mm standard snap-off blade knife.
  • Retractable trimming knife c/w 5 blades.
  • 150mm (6”) junior hacksaw frame c/w hardened blade.
  • 150mm (6”) junior hacksaw blade for metal (10).
  • 300mm (12”) DIY hacksaw frame.
  • 177mm (7”) plastic handle household scissors.
  • 63mm (21/2”) half tang filling knife.
  • 76mm (3”) half tang scraper.
  • Magnetic pick-up tool extends to 650mm.
  • 150mm (6”) linesman’s plier.
  • 125mm (5”) snipe nose plier.
  • 125mm (5”) diagonal cutting nipper.
  • 255mm (10”) straight jaw grip wrench.
  • Bradawl.
  • 415 piece poly fish type wall plug set.

  Read more
• 

  HOME HANDYMAN TOOL KIT (61-PCE)

  61 Piece Home Handyman Tool Kit

  HHK61
  Supplied in a robust toolbox c/w double latch.
  Contents:
  • Tool box with tote and wheels. • 8 piece fluted handle screwdriver set: flared 6mm stubby, 3 x 100mm and 8 x 200mm; parallel 3.2 x 75mm and 4 x 150mm; posidriv No.2 Stubby, No.1 x 75mm and No.2 x 100mm.
  • 10 piece screwdriver bit set: 6mm quick release hex bit adaptor; flat 3, 4, 5, 6, and 8mm; crosspoint No.0, 1, 2 and 3mm.
  • 18 piece wood, metal and masonry drill set 3, 4, 5, 6, 8 and 10mm bits.
  • IDH013 240V 13mm impact drill.
  • 200mm (8″) chrome vanadium adjustable spanner.
  • 225mm (9″) hi-vis magnetic boat level.
  • 600mm (24″) hi-vis girder section level.
  • 19mm x 33m black PVC insulation tape.
  • 150mm euro tester range 125/250V.
  • Adjustable telescopic 300mm diameter inspection mirror.
  • Magnetic pick-up tool extends to 650mm.
  • Bradawl.
  • 450g (16oz) claw hammer wood shaft.
  • 3m/10ft Senator hi-vis locking tape.
  • 13 segment 9mm standard snap-off blade knife.
  • Retractable trimming knife c/w 5 blades.
  • Junior hacksaw frame c/w hardened blade.
  • DIY hacksaw frame.
  • 177mm (7″) plastic handled multi-purpose household scissors.
  • 63mm (21/2″) half tang filling knife.
  • 76mm (3″) half tang scraper.
  • 150mm (6″) linesman’s pliers.
  • 125mm (5″) snipe nose pliers.
  • 125mm (5″) diagonal cutting nippers.
  • 255mm (10″) straight jaw grip wrench.
  • 22″ x 8pts homesaw hand saw.

  Read more
• 

  MAINTENANCE PRO TORQ TOOLKIT 29-PCE

  29 Piece Pro-Torq Maintenance Tool Bag & Kit

  Contents:
  • Electrician’s tool bag (320 x 340 x 125mm). • 2x small bits organiser cases. • One tool board unique system to secure tools whilst in transit. • 140mm (51/2″) autoload and lock knife – 13 segment snap-off blade. 165mm (61/2″). • Pro-Torq diagonal nippers.
  • 150mm (6″) Pro-Torq snipe nose pliers with side cutter. • 150mm (6″) Pro-Torq combination pliers.
  • Six piece Pro-Torq screwdriver set: crosspoint No.1 x 75, No.2 x 100; flared 6.3 x 100, 8.0 x 200; parallel 5.0 x 75, 5.0 x 150mm.
  • Seven piece Pro-Torq precision screwdriver set: parallel tips 1.4, 2.0, 2.4 and 3.0mm; crosspoint tips PH0-3, PH0-2 and PH-0.
  • 200mm (8″) soft grip phosphate adjustable wrench.
  • Eight piece Pro-Torq hex wrench set on clip 1.5 – 8.0mm.

  Read more
• 

  MAINTENANCE PRO TORQ TOOLKIT 45-PCE

  45 Piece Pro-Torq Maintenance Tool Roll Kit

  Contents:
  • Tear-resistant tool roll (600 x 300mm). • 140mm auto-load and lock knife – 13 segment snap-off blade. • Telescopic magnetic pick-up tool
  extends to 550mm (22″). • 150mm (6″) Pro-Torq snipe nose pliers with side cutter. • 165mm (6½”) Pro-Torq diagonal nippers.
  • Six piece Pro-Torq screwdriver set: crosspoint No.1 x 75, No.2 x 100; flared 6.3 x 100, 8.0 x 200; parallel 5.0 x 75, 5.0 x 150mm.
  • 14 piece chrome vanadium combination spanner set 6 – 19mm.
  • Three piece offset screwdriver set: No.1 crosspoint x 3/16″ parallel, No.2 crosspoint x 1/4″ parallel and No.3 crosspoint x 5/16″ parallel.
  • Seven piece Pro-Torq precision screwdriver set: parallel tips 1.4, 2.0, 2.4 and 3.0mm; crosspoint tips PH0-3, PH0-2 PH-0.
  • 200mm (8″) soft grip phosphate adjustable wrench.
  • Eight piece Pro-Torq hex wrench set on clip 1.5 – 8.0mm.

  Read more
• 

  MAINTENANCE TOOL ROLL KIT

  7 Piece Maintenance Tool Kit

  MTK7
  Contents:
  • Chrome adjustable wrench.
  • Slotted electrician’s VDE screwdriver.
  • Slip joint pliers.
  • High tensile diagonal cutting nippers.
  • Universal combination pliers.
  • No.2 crosspoint engineer’s screwdriver.
  • Flared slotted engineer’s screwdriver.
  • PVC tool roll.

  Read more
• 

  PLUMBERS HANDYMAN TOOLKIT 22-PCE

  Kennedy Plumber’s Kit – 22 Piece

  Supplied in a robust toolbox c/w double latch.
  Contents:
  • Tool box. • 255mm (10”) stillson wrench.
  • 3 – 22mm capacity tubing cutter. • 3 – 41mm tube deburrer.
  • 9.5 – 32mm basin wrench.
  • 300mm girder section spirit level.
  • Telescopic inspection mirror.
  • Junior hacksaw frame c/w hardened blade.
  • Pad saw.
  • 255mm groove slip joint waterpump plier.
  • 6 piece flat wood bit set 9.5 – 25mm.
  • 12mm x 12m ptfe thread sealing tape to bs6920.
  • 100g fluxite paste.
  • Powerflow lead free solder 3.25mm 250g.
  • 3 row plastic handle wire scratch brush.
  • 450g (1lb) grade 2 wire wool.
  • Blow lamp and 2175 gas cartridge.

  Read more
• 

  PROFESSIONAL DECORATING KIT 64-PCE

  64 Piece Professional Decorating Kit

  Contents:
  • 5x sheets grade 0 glass paper and grade 2 glass paper.
  • 5x dust masks.
  • 2x 25mm industrial paint brush.
  • 2x 13.5ltr plastic bucket.
  • 13, 50, 75 and 100mm industrial paint brushes.
  • 50 and 75mm wide half tang scrapers.
  • 38mm chisel point half tang putty knife.
  • 200 half tang combination shavehook.
  • Window scraper.
  • Sanding blocks 96 x 69 x 25 fine and 96 x 69 x 25 medium.
  • 310ml cartridge of decorators acrylic caulk.
  • 310ml cartridge gun – plastic.
  • 240mm economy paint tray – plastic.
  • 230mm wide birdcage (jumbo) paint roller.
  • 230mm long pile polyester roller refill.
  • 230mm medium pile polyester roller refill.
  • 230mm wide foam paint roller refill.
  • Long pile radiator roller complete.
  • Long pile radiator roller refill.
  • Metal telescopic handle.
  • General-purpose masking tape 19mm x 50m and 50mm x 50m.
  • 200mm (8”) paper hanging brush.
  • 220mm plastic handle household scissors.
  • 5m/16ft locking tape.
  • 8 segment blade retractable knife.
  • Pack of 10 replacement 8 segment blades.
  • Jumbo sponge. • 1m/39” rule.
  • Wallpaper seam roller.
  • 2.5ltr plastic paint kettle.
  • Paste brush.
  • 760mm canvas tool bag.
  • Paste table.
  • Dust sheet.

  Read more