Showing 33–38 of 38 results

• 

  7.00mm HSS SP/FL PARALLEL HAND REAMER

  Rp449.000

  Straight Shank Parallel Hand Reamers

  Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

  Metric Tolerances
  Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
  Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
  Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
  Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
  Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
  Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

  Read more
• 

  7.50mm HSS SP/FL PARALLEL HAND REAMER

  Straight Shank Parallel Hand Reamers

  Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

  Metric Tolerances
  Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
  Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
  Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
  Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
  Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
  Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

  Read more
• 

  8.00mm HSS SP/FL PARALLEL HAND REAMER

  Rp449.000

  Straight Shank Parallel Hand Reamers

  Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

  Metric Tolerances
  Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
  Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
  Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
  Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
  Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
  Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

  Read more
• 

  8.50mm HSS SP/FL PARALLEL HAND REAMER

  Straight Shank Parallel Hand Reamers

  Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

  Metric Tolerances
  Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
  Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
  Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
  Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
  Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
  Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

  Read more
• 

  9.00mm HSS SP/FL PARALLEL HAND REAMER

  Rp667.000

  Straight Shank Parallel Hand Reamers

  Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

  Metric Tolerances
  Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
  Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
  Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
  Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
  Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
  Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

  Read more
• 

  9.50mm HSS SP/FL PARALLEL HAND REAMER

  Straight Shank Parallel Hand Reamers

  Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.

  Metric Tolerances
  Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
  Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
  Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
  Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
  Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
  Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.

  Read more