Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the mailpoet domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the user-verification domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the userswp domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wpforms-lite domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the th-advance-product-search domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121
KC3 Milling Cutters – Cromindo Store

Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

Filter by Price

Category: KC3 Milling Cutters

KC3 Milling Cutters

Showing 1–16 of 80 results

  • 1.0mm TICN KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    With a micro hardness of 3000HV and a maximum working temperature of 400°C, giving them a better resistance to abrasive wear than TiN coated cutters.

    Short series

    Long Series

    Read more
  • 1.0mm TIN KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    TiN-Coated to allow elevated cutting speeds and help to extend tool life.

    Short Series

    Long Series

    Read more
  • 1.5mm HSS-COBALT KC3 THROWAWAY CUTTER
    Rp139.000

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

    Short series

    Read more
  • 1.5mm HSS-COBALT L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series
    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

    Read more
  • 1.5mm TICN KC3 THROWAWAY CUTTER
    Rp245.000

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    With a micro hardness of 3000HV and a maximum working temperature of 400°C, giving them a better resistance to abrasive wear than TiN coated cutters.

    Short series

    Long Series

    Read more
  • 1.5mm TICN L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series

    Read more
  • 1.5mm TIN KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    TiN-Coated to allow elevated cutting speeds and help to extend tool life.

    Short Series

    Long Series

    Read more
  • 1.5mm TIN L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series

    Read more
  • 1/16″ HSS-COBALT KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated

    Short Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/16″ HSS-COBALT L/S KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated

    Long Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”.

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/4″ HSS-COBALT KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated

    Short Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/4″ HSS-COBALT L/S KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated

    Long Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”.

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/8″ HSS-COBALT KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated

    Short Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 1/8″ HSS-COBALT L/S KC3 THROWAWAY CUTTER

    Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated

    Long Series – Inch
    Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
    *Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”.

    Inch Tolerances:
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

    Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

    TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

    TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

    Read more
  • 10.0m HSS-COBALT L/S KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    Long Series
    Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

    Read more
  • 10mm HSS-COBALT KC3 THROWAWAY CUTTER

    HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

    For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

    Short series

    Read more
4
    4
    Your Cart
    12x25mm CYL. CARBIDE BALL NOSE BURR CUT 9
    1 X Rp0 = Rp0
    1.1/16" HSS T/S DRILL
    1 X Rp939.000 = Rp939.000
    5.00mm TILE & MASONRY DRILL SET 2-PCE
    1 X Rp0 = Rp0
    230 P20/P30 BRAZED TOOL
    1 X Rp582.000 = Rp582.000
    Subtotal Rp1.521.000
    Continue ShoppingView CartCheckout