Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the mailpoet domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the user-verification domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the userswp domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wpforms-lite domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the th-advance-product-search domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/admin/store/wp-includes/functions.php on line 6121
Aluminium Geometry Cutters – Page 2 – Cromindo Store

Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

Category: Aluminium Geometry Cutters

Aluminium Geometry Cutters

Showing 17–27 of 27 results

  • 3.0mm 2FL CARBIDE AL-KARB MILLING CUTTER

    Kennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

    Short Series – 2 Flute – Metric
    Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 4.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated

    Series 15 – Regular Length
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 4.0mm 2FL CARBIDE AL-KARB MILLING CUTTER

    Kennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

    Short Series – 2 Flute – Metric
    Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 5.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated

    Series 15 – Regular Length
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 5.0mm 2FL CARBIDE AL-KARB MILLING CUTTER

    Kennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

    Short Series – 2 Flute – Metric
    Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 6.0 37DEG HIGH HELIX 3FL ROUGH E/MILL-ALUM

    SwissTech HSS-CO 8% Weldon Shank Coarse Pitch 37° High Helix for Aluminium Roughing End Mills 3 Flute: Series 20, Regular – Uncoated

    Series 20 – Regular Length
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 6.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated

    Series 15 – Regular Length
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 6.0mm 2FL CARBIDE AL-KARB MILLING CUTTER

    Kennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

    Short Series – 2 Flute – Metric
    Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 8.0 37DEG HIGH HELIX 3FL ROUGH E/MILL-ALUM

    SwissTech HSS-CO 8% Weldon Shank Coarse Pitch 37° High Helix for Aluminium Roughing End Mills 3 Flute: Series 20, Regular – Uncoated

    Series 20 – Regular Length
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 8.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CO

    SwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated

    Series 15 – Regular Length
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 8.0mm 2FL CARBIDE AL-KARB MILLING CUTTER

    Kennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

    Short Series – 2 Flute – Metric
    Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
1
    1
    Your Cart
    3-ROW PLASTIC HANDLE WIRESCRATCH BRUSH
    1 X Rp0 = Rp0
    Subtotal Rp0
    Continue ShoppingView CartCheckout