Category: HSS-Co. End Mills - Regular Series

HSS-Co. End Mills - Regular Series

Showing 97–112 of 115 results

  • 6mmx57mm O/A HSS-COBALT 4FL PL/SH END MILL
    Rp244.000

    HSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric

    Regular Length
    Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Metric Tolerances
    Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
    Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

    Read more
  • 7.0 SCR STANDARD END MILL-TICN-8% CO

    SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – TiCN Coated

    Series 36 – Regular Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 SCR STD END MILL-8% CO

    SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – Uncoated

    Series 36 – Regular Series
    Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 WELDON STD END MILL-8% CO
    Rp453.000

    SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – Uncoated

    Series 09 – Regular Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
    Shank cutting diameter:
    3-6mm to +0.04 -0.0.
    8-20mm to +0.05 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 WELDON STD END MILL-TICN-8% CO

    SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – TiCN Coated

    Series 09 – Regular Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
    Shank cutting diameter:
    3-6mm to +0.04 -0.0.
    8-20mm to +0.05 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7/16″ HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Inch

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Inch Tolerances
    Diameter: up to 1 1/2”. Tolerance: +0.0025, -0.0005.
    Diameter: Over 1 1/2”. Tolerance: +0.0050, -0.0000.

    Read more
  • 7mm HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 7mmx66mm O/A HSS-COBALT 4FL PL/SH END MILL

    HSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric

    Regular Length
    Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Metric Tolerances
    Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
    Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

    Read more
  • 8.0 SCR STD END MILL-8% CO

    SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – Uncoated

    Series 36 – Regular Series
    Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 8.0 WELDON STD END MILL-8% CO
    Rp433.000

    SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – Uncoated

    Series 09 – Regular Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
    Shank cutting diameter:
    3-6mm to +0.04 -0.0.
    8-20mm to +0.05 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 8.0 WELDON STD END MILL-TiALN-8% CO

    SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – TiALN Coated

    Series 09 – Regular Series, TiALN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
    Shank cutting diameter:
    3-6mm to +0.04 -0.0.
    8-20mm to +0.05 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 8.0 WELDON STD END MILL-TICN-8% CO

    SwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – TiCN Coated

    Series 09 – Regular Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
    Shank cutting diameter:
    3-6mm to +0.04 -0.0.
    8-20mm to +0.05 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 8.5mm HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 8mm HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 8mmx69mm O/A HSS-COBALT 4FL PL/SH END MILL
    Rp301.000

    HSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric

    Regular Length
    Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Metric Tolerances
    Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
    Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

    Read more
  • 9.5mm HSS-COBALT SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

    Regular Series Type E411T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop