Category: Carbide End Mills - Regular Series

Carbide End Mills - Regular Series

Showing 33–48 of 56 results

  • 3/16″ 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

    4 Flute: Regular Series – Inch
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 3/32″ 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

    4 Flute: Regular Series – Inch
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 3/8″ 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

    4 Flute: Regular Series – Inch
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 4.0mm 4FL STANDARD CARBIDE END MILL
    Rp338.000

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

    4 Flute: Regular Series – Metric
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 4.0mm 4FL STANDARD CARBIDE END MILL
    Rp302.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 4.5mm 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

    4 Flute: Regular Series – Metric
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 5.0mm 4FL STANDARD CARBIDE END MILL
    Rp485.000

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

    4 Flute: Regular Series – Metric
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 5.0mm 4FL STANDARD CARBIDE END MILL
    Rp390.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 5/16″ 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

    4 Flute: Regular Series – Inch
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
  • 6.0mm 4FL STANDARD CARBIDE END MILL
    Rp504.000

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

    4 Flute: Regular Series – Metric
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 6.0mm 4FL STANDARD CARBIDE END MILL
    Rp415.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 6×0.5mm ST/SH 4FL C/RADIUS END MILL Q-COAT

    Carbide Plain Shank Corner Radius End Mills 4 Flute

    Centre cutting.
    To Manufacturers Standards.
    Cutting diameter to e8.
    Shank diameter to h6
    ECQ-4PR Carbide Q-Coat.

    Series 86 Regular Length

    Read more
  • 6×1.0mm ST/SH 4FL C/RADIUS END MILL Q-COAT

    Carbide Plain Shank Corner Radius End Mills 4 Flute

    Centre cutting.
    To Manufacturers Standards.
    Cutting diameter to e8.
    Shank diameter to h6
    ECQ-4PR Carbide Q-Coat.

    Series 86 Regular Length

    Read more
  • 7.0mm 4FL STANDARD CARBIDE END MILL
    Rp651.000

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

    4 Flute: Regular Series – Metric
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

    Read more
  • 7.0mm 4FL STANDARD CARBIDE END MILL
    Rp572.000

    Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

    Regular Series
    For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

    Metric Tolerances
    Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
    Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

    Read more
  • 7/32″ 4FL STANDARD CARBIDE END MILL

    Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

    4 Flute: Regular Series – Inch
    Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

    Inch Tolerances
    Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
    Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop