Relaunch Promotion
Product Showcase
Category: Pullers - Mechanical
Pullers - Mechanical
Showing 17–28 of 28 results
-
8″ 3-JAW DOUBLE ENDED MECHANICAL PULLERAdd to cartKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
COMBINED PULLER SET (18-PCE)Read moreKennedy Mechanical Puller Sets
SWP9 Steering Wheel
Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.
Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16″ x 24 UNF). 2x 75mm screws (3/8″ x 16 UNC). 2x 90mm screws (5/16″ x 18 UNC). 1x plastic storage tray.HPB9 Harmonic Balance
For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″). Ductile steel yoke.
Contents: 1x yoke. 1x thrust bolt. 1x ram nut. 3x 75mm screws (3/8″ x 24 UNF).
3x 75mm screws (3/8″ x 16 UNC). 1x plastic storage tray.CP18 Combination
Steering wheel puller suitable for GM, Ford and Chrysler vehicles. For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″).
Contents: As SWP9 and HPB9 above. -
HARMONIC BALANCE PULLER KIT (9-PCE)Read moreKennedy Mechanical Puller Sets
SWP9 Steering Wheel
Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.
Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16″ x 24 UNF). 2x 75mm screws (3/8″ x 16 UNC). 2x 90mm screws (5/16″ x 18 UNC). 1x plastic storage tray.HPB9 Harmonic Balance
For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″). Ductile steel yoke.
Contents: 1x yoke. 1x thrust bolt. 1x ram nut. 3x 75mm screws (3/8″ x 24 UNF).
3x 75mm screws (3/8″ x 16 UNC). 1x plastic storage tray.CP18 Combination
Steering wheel puller suitable for GM, Ford and Chrysler vehicles. For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″).
Contents: As SWP9 and HPB9 above. -
INTERNAL & EXTERNAL PULLER KITAdd to cartKennedy Slide Hammer Puller Set
3 Jaw Internal & External Multi-function Slide Hammer Puller Set
Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.6 Piece Set Contents: 1x T-bar. 1x hammer 1.2kg. 1x 3 jaw internal puller 15 – 30mm. 1x 3 jaw internal puller 30 – 80mm. 1x 3 jaw external puller 15 – 80mm. 1x blow moulded case.
-
LONG JAW MECHANICAL PULLERRead moreKennedy Long Reach Mechanical Puller – 2 Jaw
Reversible
Manufactured from drop forged hardened alloy steel. Three position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the T-bar to extend the thrust bolt on to fixed shaft.
Spread: 10 – 50mm.
Reach: 300mm. -
MECHANICAL BEARING SEPARATOR SET 30-75mmAdd to cartKennedy Mechanical Separator Set
30 – 75mm
For removing bearings, gears, sprockets and bushes. Metal storage case.
Contents:
1x 7â thrust bolt.
1x 30 – 50mm separator.
1x 50 – 75mm separator.
2x 80 and 100mm main rods.
2x 90 and 110mm extension rods.
1x beam. -
SLIDE HAMMER/PULLER SET (16-PCE)Read moreKennedy Slide Hammer Puller Set
Multi-function
Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight.
Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.Contents: 1x T-bar. 1x hammer. 1x two jaw head. 1x three jaw head. 1x leg locking nut. 1x grip wrench adaptor. 1x tapping adaptor and hook. 2x axle pullers. 3x 120mm puller legs, 3x screw and nut assemblies. 1x blow moulded storage case.
-
SPARE JAWS TO SUIT KEN503-3030K/3130K/3230KRead moreKennedy Spare Jaws for Mechanical Pullers
Spare Jaws to suit Kennedy Mechanical Pullers. Supplied individually.
-
SPARE JAWS TO SUIT KEN503-3040K/3140K/3240KRead moreKennedy Spare Jaws for Mechanical Pullers
Spare Jaws to suit Kennedy Mechanical Pullers. Supplied individually.
-
SPARE JAWS TO SUIT KEN503-3060K/3160K/3260KRead moreKennedy Spare Jaws for Mechanical Pullers
Spare Jaws to suit Kennedy Mechanical Pullers. Supplied individually.
-
SPARE JAWS TO SUIT KEN503-3080K/3180K/3280KRead moreKennedy Spare Jaws for Mechanical Pullers
Spare Jaws to suit Kennedy Mechanical Pullers. Supplied individually.
-
STEERING WHEEL PULLER KIT (9-PCE)Add to cartKennedy Mechanical Puller Sets
SWP9 Steering Wheel
Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.
Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16″ x 24 UNF). 2x 75mm screws (3/8″ x 16 UNC). 2x 90mm screws (5/16″ x 18 UNC). 1x plastic storage tray.HPB9 Harmonic Balance
For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″). Ductile steel yoke.
Contents: 1x yoke. 1x thrust bolt. 1x ram nut. 3x 75mm screws (3/8″ x 24 UNF).
3x 75mm screws (3/8″ x 16 UNC). 1x plastic storage tray.CP18 Combination
Steering wheel puller suitable for GM, Ford and Chrysler vehicles. For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2″ to 4 5/8″).
Contents: As SWP9 and HPB9 above.