Showing 17–32 of 53 results

• 

  14″ (350mm) FLAT SECOND ENGINEERS FILE

  Rp153.000

  Kennedy Industrial Quality Engineer’s Hand Files – Flat

  Flat
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  14″ (350mm) HALF ROUND SECOND ENGINEERS FILE

  Rp227.000

  Kennedy Industrial Quality Engineer’s Hand Files – Half Round

  Half-Round
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  14″ (350mm) HAND SECOND ENGINEERS FILE

  Rp153.000

  Engineer’s Hand Files

  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  14″ (350mm) ROUND SECOND ENGINEERS FILE

  Rp162.000

  Kennedy Industrial Quality Engineer’s Hand Files – Round

  Round
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  14″ (350mm) SQUARE SECOND ENGINEERS FILE

  Rp194.000

  Kennedy Industrial Quality Engineer’s Hand Files – Square

  Square
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  14″ (350mm) THREE SQUARE SECOND ENGINEERS FILE

  Rp213.000

  Kennedy Industrial Quality Engineer’s Hand Files – Three Square

  Three Square
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  16″ (400mm) FLAT SECOND ENGINEERS FILE

  Rp219.000

  Kennedy Industrial Quality Engineer’s Hand Files – Flat

  Flat
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  16″ (400mm) HALF ROUND SECOND ENGINEERS FILE

  Kennedy Industrial Quality Engineer’s Hand Files – Half Round

  Half-Round
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  16″ (400mm) HAND SECOND ENGINEERS FILE

  Engineer’s Hand Files

  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) FLAT SECOND ENGINEERS FILE

  Rp37.000

  Kennedy Industrial Quality Engineer’s Hand Files – Flat

  Flat
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) HALF ROUND SECOND ENGINEERS FILE

  Rp60.000

  Kennedy Industrial Quality Engineer’s Hand Files – Half Round

  Half-Round
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) HAND SECOND ENGINEERS FILE

  Rp37.000

  Engineer’s Hand Files

  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) ROUND SECOND ENGINEERS FILE

  Rp38.000

  Kennedy Industrial Quality Engineer’s Hand Files – Round

  Round
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) SQUARE SECOND ENGINEERS FILE

  Rp47.000

  Kennedy Industrial Quality Engineer’s Hand Files – Square

  Square
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) THREE SQUARE SECOND ENGINEERS FILE

  Rp51.000

  Kennedy Industrial Quality Engineer’s Hand Files – Three Square

  Three Square
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more
• 

  4″ (100mm) WARDING SECOND ENGINEERS FILE

  Rp41.000

  Kennedy Industrial Quality Engineer’s Hand Files – Warding

  Warding
  Available in a comprehensive range of shapes and sizes.
  Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.

  Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
  Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard

  Read more