Relaunch Promotion
Product Showcase
Category: Cutting Discs
Cutting Discs
Showing 17–32 of 44 results
-
12×1/8×7/8″ C24RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
14×1/8×1″ A24NBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
180×1.6×22.23mm AS46 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
180x3x22.23mm A24RBF DPCCUTTING DISCRead moreType 42 Depressed Centre Cutting
Type 42 Depressed Centre Cutting
For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding.
Grade A24/A46 – For general purpose cutting on metals.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
180x3x22.23mm A24RBF FLAT CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230×1.9×22.23mm AS46 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
230x3x22.23mm A24RBF DPCCUTTING DISCRead moreType 42 Depressed Centre Cutting
Type 42 Depressed Centre Cutting
For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding.
Grade A24/A46 – For general purpose cutting on metals.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230x3x22.23mm A24RBF FLAT CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
230x3x22.23mm C24RBF FLAT STONE CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
24mm DIA FLAT NON REINFORCED CUT-OFF WHEEL (PK20)Read moreFlat Cut-off Wheels
Supplied in packs of 20.
-
32mm DIA FLAT NON REINFORCED CUT-OFF WHEEL (PK20)Read moreFlat Cut-off Wheels
Supplied in packs of 20.
-
-
350x3x25.4mm A36RBF FLATCUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
4.1/2×1/8×7/8″ A30TBF CUTTING DISCRead moreType 42 Depressed Centre Cutting
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 42 Depressed Centre Cutting
Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding. -
4.1/2×1/8×7/8″ A30TBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
4.1/2×1/8×7/8″ C24RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
