Relaunch Promotion
Product Showcase
JIGSAW BLADES (EQV. TO BOSCH T227D) PKT-5
Jigsaw Blades
HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.
‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.
Out of stock
SKU : KEN2402270K
Jigsaw Blades
HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.
‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.
Specification :
Brand : Kennedy Industrial
Capacity (mm) Alum. : 3.0-15.0
Capacity (mm) Plastics : 30.0
Capacity (mm) Steel : 3.0-6.0
eCl@ss Code : 21011603
Effective Length : 75
Equiv. : T227D
Features : Wavy Set Teeth
Overall Weight : 0.03
Side set teeth : y
Supplier Part No. : D&N 3.12.30/5
Tapered and ground : –
Tooth Pitch : 3.0
UNSPSC Code : 27112802
Wavy set tooth form : –
| Weight | 1 kg |
|---|
Related products
-
3 LED ALU SOFT GRIP TORCH REQUIRES (2xAA) BATTSAdd to cartEdison 3 LED Aluminium Soft Grip Torch
Water and impact resistant anodized aluminium case with rubber grip. Ultra bright long life LEDs with optical lens to produce a clear white light. Positive push button operation. All joints sealed with “O” rings.
-
7 LED ALU SOFT GRIP TORCH REQUIRES (2xD) BATTSRead moreEdison 3 LED Aluminium Soft Grip Torch
Water and impact resistant anodized aluminium case with rubber grip. Ultra bright long life LEDs with optical lens to produce a clear white light. Positive push button operation. All joints sealed with “O” rings.
-
LED RECHARGEABLE LANTERNAdd to cartLED Rechargeable Spotlight
ELRS002
2 million candle power LED rechargeable spotlight. Super bright one watt LED light.
Side LED tube light. Two position handle, to ensure comfortable and ergonomic access. Swivel handle. 6V 4Ah sealed lead acid battery. Supplied with AC/DC mains charger and 12V DC car plug adaptor for portable charging.
Battery operation times (10 hours full charge):
· Main spot light up to 6 hours.
· Side LED tube light up to 70 hours. -
KRYPTON BULB 9.0V/0.75A FOR 040 TORCH (PK-2)Read moreBulbs
To suit Edison pocket mini torches and security flashlights