Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

127x22mm F/GLASS ZIRC FLAP DISC P60

High Performance Flap Discs

Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm)

Out of stock

SKU : YRK2208630K

High Performance Flap Discs

Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm)

Specification :
Brand : York Abrasives
Diameter x Bore (mm) : 127 x 22
eCl@ss Code : 21011318
Grit : P60
MOS Rpm : 12,000
Overall Weight : 1.15
UNSPSC Code : 31191504
Weight per 10 : 1.15kg

Weight 1 kg
SKU: YRK2208630K Categories: , ,

Related products

  • W193 16mmx10 BROWN ALUMOXIDE MOUNTED POINT

    Mounted Points and Wheels

    Suitable for use with Kobe, Dremel and Osaki Multi Tools

    Mounted Points and Wheels
    3mm shank. ‘W’ numbers are for Wheels (for flat surface grinding).
    ‘B’ numbers are for points (Shaped for contour grinding)

    Read more
  • B44 6.35×10.5mm PINK ALUMOXIDE MOUNTED POINT

    Pink Al-ox

    Suitable for use with Kobe, Dremel and Osaki Multi Tools

    Pink Al-ox
    For use on harder metals where greater precision is required (lower stock removal rate)

    Read more
  • 753054 SANDING SHEETS 100 GRIT (PK-10)

    Sanding Sheets

    Packs of 10 in 60 grit, 100 grit and 150 grit.

    Read more
  • 2-ROW PLASTIC HANDLE WIRE SCRATCH BRUSH

    Wire Scratch Brushes

    for cleaning all rough surfaces on a range of materials to remove paint, dirt, rust and stubborn deposits. Plastic handled with cast steel bristles for general purpose work.
    *with scraper

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping