Relaunch Promotion
Product Showcase
V100FF FIXED SPINDLE VERTICAL CLAMP
Indexa Vertical Industrial Toggle Clamp – Fixed Spindle & Solid Bar Type
Fixed Spindle & Solid Bar Type
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator ‘down-time’ during all stages of production.
Clamping Capacity – the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.
Out of stock
SKU : IND4431120K
Indexa Vertical Industrial Toggle Clamp – Fixed Spindle & Solid Bar Type
Fixed Spindle & Solid Bar Type
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator ‘down-time’ during all stages of production.
Clamping Capacity – the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.
Specification :
Base Type : Flanged
Brand : Indexa
eCl@ss Code : 21020501
Holding Capacity : 90kg
Movement of Bar : 100°
Movement of Handle : 60°
Product Number : V100-FF
Supplied With : Fixed Spindle ( 1/4″)
Supplier Part No. : V100FF
UNSPSC Code : 27112132
Weight each : 170g
| Weight | 1 kg |
|---|
Related products
-
9/16″x1/2″x13TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
1/2″x3/8″x16TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
12mmxM10 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
SC166431 64x31x15mm M16 STEP CLAMPRead moreAtlas Step Clamp
Material: Medium Carbon Steel.
Hardness: HRC 32 – 38.
Surface Finish: Black Oxide.