Relaunch Promotion
Product Showcase
POA500 FOOD SAFE PENETRATING OIL 500ml
FDA Compliant
NSF H1 Registered
Food Safe
Synthetic Translucent
Tasteless water white fluid
Non-Toxic
Anti-corrosive
Penetrating oil for dismantling, lubricating and cleaning. This odourless oil is tasteless and displaces water leaving a hydrophobic coating to protect surfaces from corrosion.
It penetrates threads and crevices to release and lubricate delicate mechanisms, pivot points and sliding surfaces whilst degreasing hard surfaces. Can be used as a light lubricate.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.
Out of stock
SKUĀ :Ā SOL7405930D
FDA Compliant
NSF H1 Registered
Food Safe
Synthetic Translucent
Tasteless water white fluid
Non-Toxic
Anti-corrosive
Penetrating oil for dismantling, lubricating and cleaning. This odourless oil is tasteless and displaces water leaving a hydrophobic coating to protect surfaces from corrosion.
It penetrates threads and crevices to release and lubricate delicate mechanisms, pivot points and sliding surfaces whilst degreasing hard surfaces. Can be used as a light lubricate.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.
SpecificationĀ :
BrandĀ :Ā Solent Lubricants For Food
eCl@ss CodeĀ :Ā 23060101
Pack SizeĀ :Ā 500ml
UNSPSC CodeĀ :Ā 15121526
| Weight | 1 kg |
|---|
Related products
-
TRANSLUSCENT PALE AMBER HOT DIP (CASE-50)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
BALL POINT PAINT MARKER 46ml WHITERead moreIndustrial Paint Markers
Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece – ink cannot be spilt from the cap unintentionally. One head can be interchanged from differing inks and bottles. Can be refilled from 1 litre bulk refills of the specially formulated ink.
-
2.5LTR MELTING POTRead moreIndustrial Melting Pots
A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.
-
BALL POINT PAINT MARKER 46ml BLACKRead moreIndustrial Paint Markers
Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece – ink cannot be spilt from the cap unintentionally. One head can be interchanged from differing inks and bottles. Can be refilled from 1 litre bulk refills of the specially formulated ink.